收藏切换
Effect of Cr Content on Microstructure and Heat Exposure of Al-Cu-Mg-Ag Alloy
收藏切换
PDF
Man TANG, Zhiyi LIU, Song BAI, Suwang LI
Mining and Metallurgical Engineering | 2024, 44(3) : 166 - 169
Less
收藏切换
Mining and Metallurgical Engineering | 2024, 44(3): 166-169
MATERIALS
Effect of Cr Content on Microstructure and Heat Exposure of Al-Cu-Mg-Ag Alloy
Full
Man TANG, Zhiyi LIU, Song BAI, Suwang LI
Affiliations
  • School of Materials Science and Engineering, Central South University, Changsha 410083, Hunan, China
Published: 2024-06-01 doi: 10.3969/j.issn.0253-6099.2024.03.035
Outline
收藏切换

The effect of Cr content on microstructure and heat exposure of Al-Cu-Mg-Ag alloys was investigated. It is found that strength of the alloys at room temperature decreases after an initial increase as Cr content increases, and the 0.2%Cr alloy exhibits excellent room-temperature mechanical properties. Transmission quantitative calculation results suggest that an addition of 0.2%Cr can promote precipitation of Ω phase and improve coarsening resistance of Ω phase in the alloy after heat exposure. With the addition of Cr exceeding 0.3%, the (Al, Cr, Mn, Ti)-enriched phases precipitate at the grain boundaries of the alloy, leading to coarser grains.

Al-Cu-Mg-Ag alloy  /  mechanical properties  /  grain refinement  /  heat exposure  /  microalloying  /  Cr
Man TANG, Zhiyi LIU, Song BAI, Suwang LI. Effect of Cr Content on Microstructure and Heat Exposure of Al-Cu-Mg-Ag Alloy[J]. Mining and Metallurgical Engineering, 2024 , 44 (3) : 166 -169 . DOI: 10.3969/j.issn.0253-6099.2024.03.035
Year 2024 volume 44 Issue 3
PDF
44
22
Cite this Article
BibTeX
Article Info
doi: 10.3969/j.issn.0253-6099.2024.03.035
  • Receive Date:2023-11-22
  • Online Date:2026-03-17
  • Published:2024-06-01
Article Data
Affiliations
History
  • Received:2023-11-22
Affiliations
    School of Materials Science and Engineering, Central South University, Changsha 410083, Hunan, China
References
Share
https://castjournals.cast.org.cn/joweb/kygczz/EN/10.3969/j.issn.0253-6099.2024.03.035
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT