收藏切换
Beneficiation of Flake Graphite Ore from Africa for Staged Recovery
收藏切换
PDF
Weiyong CUI, Ling ZHANG, Yongli LI, Qiang GUO
Mining and Metallurgical Engineering | 2024, 44(3) : 44 - 47
Less
收藏切换
Mining and Metallurgical Engineering | 2024, 44(3): 44-47
MINERAL PROCESSING
Beneficiation of Flake Graphite Ore from Africa for Staged Recovery
Full
Weiyong CUI, Ling ZHANG, Yongli LI, Qiang GUO
Affiliations
  • Key Laboratory of Green Process and Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, China
Published: 2024-06-01 doi: 10.3969/j.issn.0253-6099.2024.03.009
Outline
收藏切换

With a flake graphite ore from Africa as the raw material, a beneficiation technique was adopted to recover graphite resource according to ore size fraction. The results show that the fixed carbon content of the graphite feed ore is 32.54%, and the large flake graphite mainly in sheet or banded structure is intergrown with feldspar minerals. The optimized roughing condition is determined as follows: grinding fineness of -0.074 mm 72.87%, kerosene dosage of 50 g/t and terpineol dosage of 150 g/t. A flotation process with one stage of roughing, one stage of scavenging and four stages of cleaning is adopted, in which the large flake graphite is screened from the flotation production of the 1st-stage of cleaning, while the undersize is treated further by three stages of grinding and three stages of cleaning to recover fine flake graphite. The closed-circuit test shows that the fixed carbon content in the large flake graphite (+0.150 mm) concentrate and the fine flake graphite (-0.150 mm) concentrate reaches 96.53% and 96.21%, respectively. The recovery rate of the large flake graphite reaches 22.74%, which is higher by 7.66 percentage points compared to that by conventional regrinding-separation approach.

flake graphite  /  flotation  /  preferential classification  /  staged recovery
Weiyong CUI, Ling ZHANG, Yongli LI, Qiang GUO. Beneficiation of Flake Graphite Ore from Africa for Staged Recovery[J]. Mining and Metallurgical Engineering, 2024 , 44 (3) : 44 -47 . DOI: 10.3969/j.issn.0253-6099.2024.03.009
Year 2024 volume 44 Issue 3
PDF
61
27
Cite this Article
BibTeX
Article Info
doi: 10.3969/j.issn.0253-6099.2024.03.009
  • Receive Date:2023-12-15
  • Online Date:2026-03-17
  • Published:2024-06-01
Article Data
Affiliations
History
  • Received:2023-12-15
Funding
Affiliations
    Key Laboratory of Green Process and Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, China
References
Share
https://castjournals.cast.org.cn/joweb/kygczz/EN/10.3969/j.issn.0253-6099.2024.03.009
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT