收藏切换
Simulation Study of Flow Field Characteristics of Underwater Reamer Operation
收藏切换
PDF
Zhou LI, Xiaojun ZHUO, Yangrui CHENG, Chengcai JI, Zhuo WU, Bin LUO
Mining and Metallurgical Engineering | 2023, 43(4) : 1 - 5
Less
收藏切换
Mining and Metallurgical Engineering | 2023, 43(4): 1-5
MININP
Simulation Study of Flow Field Characteristics of Underwater Reamer Operation
Full
Zhou LI, Xiaojun ZHUO, Yangrui CHENG, Chengcai JI, Zhuo WU, Bin LUO
Affiliations
  • State Key Laboratory of Exploitation and Utilization of Deep Sea Mineral Resources, Changsha Research Institute of Mining and Metallurgy Co Ltd, Changsha 410012, Hunan, China
Published: 2023-08-01 doi: 10.3969/j.issn.0253-6099.2023.04.001
Outline
收藏切换

Based on the calculation theory of solid-liquid two-phase flow and consideration of collision effect, a hydrodynamic model was established by using VOF model, and reamer operation under different working conditions was also analyzed by numerical simulation. It is shown that a reamer working with an inclination angle of 45° can have a good effect, resulting in percentage of disturbed area at 68.32%. As the rotating speed of reamer increases, disturbance of the waters above a reamer gradually becomes violent, and the scope of waters being disturbed also gradually becomes wider first and then narrows down. It is concluded that a reamer should work with an inclination angle of 45°, rotate at a speed of 45 r/min and move laterally at a speed of 0.2 m/s, which can reduce disturbance to the waters brought by its operation, thus minimize the secondary pollution to the waters to a certain extent.

dredging reamer  /  numerical simulation  /  inclination angle  /  disturbance
Zhou LI, Xiaojun ZHUO, Yangrui CHENG, Chengcai JI, Zhuo WU, Bin LUO. Simulation Study of Flow Field Characteristics of Underwater Reamer Operation[J]. Mining and Metallurgical Engineering, 2023 , 43 (4) : 1 -5 . DOI: 10.3969/j.issn.0253-6099.2023.04.001
Year 2023 volume 43 Issue 4
PDF
33
11
Cite this Article
BibTeX
Article Info
doi: 10.3969/j.issn.0253-6099.2023.04.001
  • Receive Date:2023-02-09
  • Online Date:2026-03-05
  • Published:2023-08-01
Article Data
Affiliations
History
  • Received:2023-02-09
Funding
Affiliations
    State Key Laboratory of Exploitation and Utilization of Deep Sea Mineral Resources, Changsha Research Institute of Mining and Metallurgy Co Ltd, Changsha 410012, Hunan, China
References
Share
https://castjournals.cast.org.cn/joweb/kygczz/EN/10.3969/j.issn.0253-6099.2023.04.001
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT