收藏切换
Effect of Heat Treatment on Microstructure and Mechanical Properties of SLM-AlSi10Mg Alloy
收藏切换
Miao WANG1, Mingliang LI1, Chunhua LIU2, Guobing YAN3
Mining and Metallurgical Engineering | 2026, 46(1) : 192 - 196
Less
收藏切换
Mining and Metallurgical Engineering | 2026, 46(1): 192-196
• MATERIALS •
Effect of Heat Treatment on Microstructure and Mechanical Properties of SLM-AlSi10Mg Alloy
Full
Miao WANG1, Mingliang LI1, Chunhua LIU2, Guobing YAN3
Affiliations
  • 1.School of Automobile and Transportation, Yancheng Polytechnic College, Yancheng 224005, Jiangsu, China
  • 2.School of Materials Science and Engineering, Nanchang Hangkong University, Nanchang 330063, Jiangxi, China
  • 3.Jiangsu Xingchuangwei Intelligent Technology Co., Ltd., Yancheng 224005, Jiangsu, China
doi: 10.3969/j.issn.0253-6099.2026.01.032
Outline
收藏切换

SLM-AlSi10Mg aluminum master alloy is compared to differently heat-treated LM-AlSi10Mg aluminum alloys and ZL104 cast aluminum alloy for investigating the difference in microstructure and mechanical properties. It is shown that the base material has a tensile strength of 545 MPa and plasticity of 5.28%, and also has similar microstructure and mechanical properties after direct aging treatment, indicating this heat treatment is ineffective for the alloy; after the base material is subjected to solution-aging treatment, the α-Al matrix is transformed into equiaxed crystals with a grain size of about 2 μm and the second phase presents as dispersed spherical particles, which weakens the splitting effect of reticular eutectic Si on the Al matrix. Such heat-treated alloy has the tensile strength of 391 MPa, which is lower than that of base mater but higher than that of ZL104, and has the plasticity of 14.09%, which is significantly higher compared to the base material and ZL104, indicating that such heat treatment is effective. After solution-aging treatment, the SLM-AlSi10Mg alloy exhibits better mechanical properties compared to the commonly used ZL104 cast aluminum alloy, thus is considered to replace ZL104 cast aluminum alloy in practical engineering applications, which can not only reduce the manufacturing cost of aluminum alloy parts but also improve production efficiency.

heat treatment  /  additive manufacturing  /  AlSi10Mg  /  mechanical properties  /  ZL104  /  selective laser melting
王淼, 李明亮, 刘春花, 闫国兵. 热处理对SLM-AlSi10Mg组织与力学性能的影响. 矿冶工程杂志, 2026 , 46 (1) : 192 -196 . DOI: 10.3969/j.issn.0253-6099.2026.01.032
Miao WANG, Mingliang LI, Chunhua LIU, Guobing YAN. Effect of Heat Treatment on Microstructure and Mechanical Properties of SLM-AlSi10Mg Alloy[J]. Mining and Metallurgical Engineering, 2026 , 46 (1) : 192 -196 . DOI: 10.3969/j.issn.0253-6099.2026.01.032
Year 2026 volume 46 Issue 1
111
30
Cite this Article
BibTeX
Article Info
doi: 10.3969/j.issn.0253-6099.2026.01.032
  • Receive Date:2025-09-02
  • Online Date:2026-10-08
Article Data
Affiliations
History
  • Received:2025-09-02
Funding
Affiliations
    1.School of Automobile and Transportation, Yancheng Polytechnic College, Yancheng 224005, Jiangsu, China
    2.School of Materials Science and Engineering, Nanchang Hangkong University, Nanchang 330063, Jiangxi, China
    3.Jiangsu Xingchuangwei Intelligent Technology Co., Ltd., Yancheng 224005, Jiangsu, China
References
Share
https://castjournals.cast.org.cn/joweb/kygczz/EN/10.3969/j.issn.0253-6099.2026.01.032
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT