Home Journals Articles Updates About
CN
image
收藏切换
Preparation and Properties of Quinoline-imidized Transparent Polyimide at Low Temperature
收藏切换
PDF
Cheng MA, Shumei LIU, Jianqing ZHAO, Zhigeng CHEN, Haohao HUANG
Insulating Materials | 2021, 54(11) : 69 - 74
Less
收藏切换
Insulating Materials | 2021, 54(11): 69-74
• Polyimide Film Special Issue •
Preparation and Properties of Quinoline-imidized Transparent Polyimide at Low Temperature
Full
Cheng MA, Shumei LIU, Jianqing ZHAO, Zhigeng CHEN, Haohao HUANG
Affiliations
  • College of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, China
Published: 2021-11-22 doi: 10.16790/j.cnki.1009-9239.im.2021.11.009
Outline
收藏切换

A polyamide acid was prepared using 4,4′-diamino-2,2′-bistrifluoromethyl benzene (TFMB) and 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA) as raw materials. The azocyclic quinoline (QL) was used to promote its imidization at lower temperature, and the amount of QL, maximum imidization temperature, and curing time were optimized. The imidization degree of polyimide (PI) film was determined by infrared spectroscopy. The results show that when the molar addition of QL is twice that of BPDA, the polyamide acid is only cured for 4 h at 200℃, the imidization degree is more than 99%. After treated at 250℃ for 0.5 h to remove the residual solvent and QL, the thermal stability of the PI is improved greatly, while its light transmittance is basically unchanged. Compared with the PI film imidized at 300℃, the 5% weight loss temperature (T5%), glass transition temperature (Tg), and tensile strength of the PI film whose imidization promoted by QL decrease slightly, but the elongation at break increases, and the light transmittance at 400 nm increases from 4.5% to 34.4%.

polyimide  /  quinoline  /  low-temperature imidization  /  elongation at break  /  light transmittance
Cheng MA, Shumei LIU, Jianqing ZHAO, Zhigeng CHEN, Haohao HUANG. Preparation and Properties of Quinoline-imidized Transparent Polyimide at Low Temperature[J]. Insulating Materials, 2021 , 54 (11) : 69 -74 . DOI: 10.16790/j.cnki.1009-9239.im.2021.11.009
Appendix
Less
Year 2021 volume 54 Issue 11
PDF
166
75
Cite this Article
BibTeX
Article Info
doi: 10.16790/j.cnki.1009-9239.im.2021.11.009
  • Receive Date：2021-02-05
  • Online Date：2026-03-23
  • Published：2021-11-22
Article Data
Affiliations
History
  • Received：2021-02-05
  • Revised：2021-03-12
Funding
Affiliations
    College of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, China
References
Share
https://castjournals.cast.org.cn/joweb/jycl/EN/10.16790/j.cnki.1009-9239.im.2021.11.009
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family		 属数
Number of
genus		 种数
Number of
species		 占总种数比例
Percentage of
total species (%)		 属
Genus		 种数
Number of
species		 占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT
Links
Articles
Latest Articles
Most Read
Collections
Updates
Events
News
Multimedia
About
About Us
Contact
No. 86 Xueyuan South Road, Haidian District, Beijing
100081
010-62199257
qkjq@cast.org.cn

Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House