Home Journals Articles Updates About
CN
image
收藏切换
Application of Visual Identity System in Appearance Defect Detection of Polyimide Film Sintering Wire
收藏切换
PDF
Wenjin WANG1, Chang TANG1, Xiqiang XU2, Hongsheng CHEN1, Xichuan LIANG1, Changzhi XUE1
Insulating Materials | 2021, 54(5) : 104 - 108
Less
收藏切换
Insulating Materials | 2021, 54(5): 104-108
• Test and Analysis •
Application of Visual Identity System in Appearance Defect Detection of Polyimide Film Sintering Wire
Full
Wenjin WANG1, Chang TANG1, Xiqiang XU2, Hongsheng CHEN1, Xichuan LIANG1, Changzhi XUE1
Affiliations
  • 1Hunan Key Laboratory of Electrical Insulation Technology, CRRC Zhuzhou Electric Co., Ltd., Zhuzhou 412000, China
  • 2Zhuzhou Zhaoyuan Electromechanical Technology Co., Ltd., Zhuzhou 412000, China
Published: 2021-05-20 doi: 10.16790/j.cnki.1009-9239.im.2021.05.016
Outline
收藏切换

The traditional electromagnetic wire appearance defect detection uses manual detection, which is low efficiency and high cost. With the continuous improvement of requirements of motor on the appearance quality of electromagnetic wire, it is necessary to enhance the identification efficiency of electromagnetic wire appearance defects. A visual identity system of electromagnetic wires defects was developed, and the practical application effect of the system was verified. The results show that the defect visual identity system can improve the detection rate of the thin film sintering line appearance defects. By analyzing the statistical types and quantities of defects, the problems of raw materials or the production process problems of electromagnetic wire can be found in time, so as to formulate corrective measures in time and reduce the rejection rate of the thin film sintering line.

polyimide film  /  sintering wire  /  visual identity system  /  defects
Wenjin WANG, Chang TANG, Xiqiang XU, Hongsheng CHEN, Xichuan LIANG, Changzhi XUE. Application of Visual Identity System in Appearance Defect Detection of Polyimide Film Sintering Wire[J]. Insulating Materials, 2021 , 54 (5) : 104 -108 . DOI: 10.16790/j.cnki.1009-9239.im.2021.05.016
Appendix
Less
Year 2021 volume 54 Issue 5
PDF
70
29
Cite this Article
BibTeX
Article Info
doi: 10.16790/j.cnki.1009-9239.im.2021.05.016
  • Receive Date：2020-07-22
  • Online Date：2026-03-03
  • Published：2021-05-20
Article Data
Affiliations
History
  • Received：2020-07-22
  • Revised：2020-09-08
Affiliations
    1Hunan Key Laboratory of Electrical Insulation Technology, CRRC Zhuzhou Electric Co., Ltd., Zhuzhou 412000, China
    2Zhuzhou Zhaoyuan Electromechanical Technology Co., Ltd., Zhuzhou 412000, China
References
Share
https://castjournals.cast.org.cn/joweb/jycl/EN/10.16790/j.cnki.1009-9239.im.2021.05.016
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family		 属数
Number of
genus		 种数
Number of
species		 占总种数比例
Percentage of
total species (%)		 属
Genus		 种数
Number of
species		 占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT
Links
Articles
Latest Articles
Most Read
Collections
Updates
Events
News
Multimedia
About
About Us
Contact
No. 86 Xueyuan South Road, Haidian District, Beijing
100081
010-62199257
qkjq@cast.org.cn

Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House