收藏切换
Preparation of Polymer Composites with Positive Temperature Coefficient and Simulation Study on Its Current Limiting Characteristics
收藏切换
PDF
Difan LIU, Shaolong ZHONG, Zhimin DANG
Insulating Materials | 2021, 54(3) : 24 - 28
Less
收藏切换
Insulating Materials | 2021, 54(3): 24-28
Material Research
Preparation of Polymer Composites with Positive Temperature Coefficient and Simulation Study on Its Current Limiting Characteristics
Full
Difan LIU, Shaolong ZHONG, Zhimin DANG
Affiliations
  • State Key Laboratory of Electric Power System, Department of Electrical Engineering, Tsinghua University, Beijing 100084, China
Published: 2021-02-20 doi: 10.16790/j.cnki.1009-9239.im.2021.03.004
Outline
收藏切换

PTC resistance device, which made by positive temperature coefficient (PTC) material, can be used as a passive component to prevent overcurrent fault. In this paper, four kinds of polymer-based PTC materials were prepared by melting blending method, and the effects of conductive filler concentration, coupling agent, and supplementary conductive filler on their properties were studied. According to the temperature-resistance characteristics and heat transfer equation of polymer PTC composite, its current limiting process was simulated. The experimental results show that increasing the concentration of conductive filler will lead to the decrease of the resistivity of composite at room temperature. The PTC properties of the composites can be improved by using silane coupling agent to modify CB and adjusted by the interaction of various fillers. The simulation results show that under certain assumptions, the PTC resis-tor, as a passive component to prevent overcurrent fault, can limit the short-circuit current of power system in a short time.

PTC  /  composites  /  current limiting characteristic  /  simulation
Difan LIU, Shaolong ZHONG, Zhimin DANG. Preparation of Polymer Composites with Positive Temperature Coefficient and Simulation Study on Its Current Limiting Characteristics[J]. Insulating Materials, 2021 , 54 (3) : 24 -28 . DOI: 10.16790/j.cnki.1009-9239.im.2021.03.004
Year 2021 volume 54 Issue 3
PDF
100
40
Cite this Article
BibTeX
Article Info
doi: 10.16790/j.cnki.1009-9239.im.2021.03.004
  • Receive Date:2020-05-21
  • Online Date:2026-01-26
  • Published:2021-02-20
Article Data
Affiliations
History
  • Received:2020-05-21
  • Revised:2020-06-06
Funding
Affiliations
    State Key Laboratory of Electric Power System, Department of Electrical Engineering, Tsinghua University, Beijing 100084, China
References
Share
https://castjournals.cast.org.cn/joweb/jycl/EN/10.16790/j.cnki.1009-9239.im.2021.03.004
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT