To address the issues of inadequate high-temperature insulation performance and thermal stability of wires, a high-temperature resistant ceramic coating was prepared using the nano alumina and a small quantity of nano silica as the primary raw materials by nanoparticle surface modification technology, then the ceramic coating was coated on quartz fiber braided layer to prepare a high-temperature composite insulating material. The structure, composition, and thermal stability of the coating were analyzed by X-ray diffraction (XRD), fourier-transform infrared spectroscopy (FTIR), and thermogravimetric-differential scanning calorimetry (TG-DSC). The morphology, volume resistivity, and electric strength of the high-temperature resistant ceramic coating-quartz fiber composite insulation layer before and after calcination were analyzed by scanning electron microscopy (SEM), high insulation resistance tester, and automatic voltage tester. The results show that the ceramic coating forms a ceramic protective layer on the quartz fiber braided layer after high temperature calcination, which can enhance the temperature resistance rating of the quartz fiber and improve its insulation performance. When the temperature exceeds 800℃, the insulation resistivity of the high-temperature resistant composite insulation layer still exceeds 2×10⁶ Ω·m, and the average electric strength at room temperature is as high as 400 kV/m, which has certain application prospects in the wires on specialized equipments such as aerospace engines, excitation coils, transformers.