收藏切换
Study on transient temperature distribution of defects in XLPE cables based on electromagnetic-thermal coupling
收藏切换
PDF
Xingang CHEN1, 2, Xin SONG1, Zhipeng MA1, 2, Shiyao TAN1, Yijie FAN1, Ningyi LI1, Yuyang HUANG1, Zhengting ZHOU1
Insulating Materials | 2024, 57(4) : 122 - 129
Less
收藏切换
Insulating Materials | 2024, 57(4): 122-129
Test and Analysis
Study on transient temperature distribution of defects in XLPE cables based on electromagnetic-thermal coupling
Full
Xingang CHEN1, 2, Xin SONG1, Zhipeng MA1, 2, Shiyao TAN1, Yijie FAN1, Ningyi LI1, Yuyang HUANG1, Zhengting ZHOU1
Affiliations
  • 1School of Electrical and Electronic Engineering, Chongqing University of Technology, Chongqing 400054, China
  • 2Chongqing Energy Internet Engineering Technology Research Center, Chongqing 400054, China
Published: 2024-04-20 doi: 10.16790/j.cnki.1009-9239.im.2024.04.017
Outline
收藏切换

In view of three common defects of 10 kV cables, three-dimensional cable defect models were established and conducted electromagnetic-thermal coupled temperature field analysis to study the transient temperature models of three defective cables. The effects of different operating currents and laying conditions on the temperature of three defective cables were analyzed. The results show that the harm of defects on the cable ranked from high to low is metal tip defect, air gap defect, and scratch defect. Under the same current carrying capacity, the temperature at the metal tip defect is higher than that at the other two defects. It is determined that the heat dissipation effect of tunnel laying is the best when the cable has defects. The internal temperature of the cable without defects decreases gradually from the core to outer sheath in the radial direction, and the internal temperature field of the cable is distorted under the action of defects. The fitting coefficients between core temperature and outer sheath temperature of the defective cable, and the fitting coefficients between temperature at the defect and the core temperature of cable are both close to 1. The simulation fitting results provide theoretical support for the judgment and identification of cable defects.

electromagnetic thermal coupling  /  defect model  /  laying method  /  fitting analysis  /  finite element analysis
Xingang CHEN, Xin SONG, Zhipeng MA, Shiyao TAN, Yijie FAN, Ningyi LI, Yuyang HUANG, Zhengting ZHOU. Study on transient temperature distribution of defects in XLPE cables based on electromagnetic-thermal coupling[J]. Insulating Materials, 2024 , 57 (4) : 122 -129 . DOI: 10.16790/j.cnki.1009-9239.im.2024.04.017
Year 2024 volume 57 Issue 4
PDF
211
101
Cite this Article
BibTeX
Article Info
doi: 10.16790/j.cnki.1009-9239.im.2024.04.017
  • Receive Date:2023-05-18
  • Online Date:2025-12-22
  • Published:2024-04-20
Article Data
Affiliations
History
  • Received:2023-05-18
  • Revised:2023-07-26
Funding
Affiliations
    1School of Electrical and Electronic Engineering, Chongqing University of Technology, Chongqing 400054, China
    2Chongqing Energy Internet Engineering Technology Research Center, Chongqing 400054, China
References
Share
https://castjournals.cast.org.cn/joweb/jycl/EN/10.16790/j.cnki.1009-9239.im.2024.04.017
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT