收藏切换
Study on evaluation method of XLPE insulation voltage endurance coefficient based on electrical stress damage characteristic value
收藏切换
PDF
Xingang CHEN1, 2, Ningyi LI1, Zhipeng MA1, 2, Shiyao TAN1, Yijie FAN1, Jinjing ZHANG1, Yuyang HUANG1, Long ZHAO1
Insulating Materials | 2024, 57(3) : 82 - 88
Less
收藏切换
Insulating Materials | 2024, 57(3): 82-88
Insulation Technology
Study on evaluation method of XLPE insulation voltage endurance coefficient based on electrical stress damage characteristic value
Full
Xingang CHEN1, 2, Ningyi LI1, Zhipeng MA1, 2, Shiyao TAN1, Yijie FAN1, Jinjing ZHANG1, Yuyang HUANG1, Long ZHAO1
Affiliations
  • 1Chongqing University of Technology, Chongqing 400054, China
  • 2Chongqing Engineering Research Center of Energy Internet, Chongqing 400054, China
Published: 2024-03-20 doi: 10.16790/j.cnki.1009-9239.im.2024.03.011
Outline
收藏切换

The voltage endurance coefficient n of XLPE insulation can characterize the electrical life characteristics of the insulation, and the n value can be obtained by analyzing the failure data obtained from the accelerated life test. However, the accuracy of the n value is affected by the applied field strength in the accelerated life test and the analysis method of the failure data obtained in the test. In this paper, the evaluation method of voltage endurance coefficient n was studied. The constant stress test and the step stress test were conducted on XLPE insulation samples, respectively, and a test data analysis method based on damage eigenvalues was proposed. This method established the mapping relationship between accumulated damage threshold (Dc) and n in the test through the damage matrix, and used the change of matrix rank as the selection criteria of n value. The results show that according to the proposed method, the XLPE insulation voltage endurance coefficient n2 obtained in constant stress test is 12.43 and n3 obtained in step stress test is 12.04, which compare with the XLPE insulation voltage endurance coefficient n1 of 12.83 obtained by linear fitting, the difference is only 3% and 6%. Moreover, the proposed method can save more than 75% of the test time, which verifies the effectiveness of the method.

XLPE insulation  /  cable  /  voltage endurance coefficient  /  constant stress method  /  step stress method
Xingang CHEN, Ningyi LI, Zhipeng MA, Shiyao TAN, Yijie FAN, Jinjing ZHANG, Yuyang HUANG, Long ZHAO. Study on evaluation method of XLPE insulation voltage endurance coefficient based on electrical stress damage characteristic value[J]. Insulating Materials, 2024 , 57 (3) : 82 -88 . DOI: 10.16790/j.cnki.1009-9239.im.2024.03.011
Year 2024 volume 57 Issue 3
PDF
152
67
Cite this Article
BibTeX
Article Info
doi: 10.16790/j.cnki.1009-9239.im.2024.03.011
  • Receive Date:2023-04-07
  • Online Date:2025-12-22
  • Published:2024-03-20
Article Data
Affiliations
History
  • Received:2023-04-07
  • Revised:2023-06-14
Funding
Affiliations
    1Chongqing University of Technology, Chongqing 400054, China
    2Chongqing Engineering Research Center of Energy Internet, Chongqing 400054, China
References
Share
https://castjournals.cast.org.cn/joweb/jycl/EN/10.16790/j.cnki.1009-9239.im.2024.03.011
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT