PDF
Full
Outline
In this paper, epoxy resin bulk molding compound (EP-BMC) was prepared by mixing short cut glass fibers and calcium sulfate whiskers with epoxy resin matrix. After molding and curing, the influence of glass fiber filler ratio on the wear resistance, mechanical properties, and dimensional stability of EP-BMC material was researched. The results show that with the increase of glass fiber filler ratio, the wear resistance and the linear expansion coefficient of EP-BMC material after thermal ageing decrease continuously, while the tensile strength and bending strength increase at first and then decrease. When the mass ratio of glass fiber to filler is 30∶40, the EP-BMC material shows optimal comprehensive performance. After thermal ageing, the volume wear is 1.00 mm3, the tensile strength and bending strength is 56 MPa and 145 MPa, respectively, the linear expansion coefficient is 24.94 μm·m-1·℃-1, and the volume resistance reaches 2.0×1013 Ω.
PDF
159
68
| 科 Family | 属数 Number of genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) | 属 Genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) |
|---|---|---|---|---|---|---|
| 鹅膏菌科Amanitaceae | 2 | 11 | 5.26 | 鹅膏菌属 Amanita | 10 | 4.78 |
| 小菇科 Mycenaceae | 2 | 12 | 5.74 | 丝盖伞属 Inocybe | 5 | 2.39 |
| 多孔菌科 Polyporaceae | 8 | 14 | 6.70 | 蜡蘑属 Laccaria | 5 | 2.39 |
| 红菇科 Russulaceae | 3 | 23 | 11.00 | 小皮伞属 Marasmius | 6 | 2.87 |
| 小菇属 Mycena | 11 | 5.26 | ||||
| 光柄菇属 Pluteus | 5 | 2.39 | ||||
| 红菇属 Russula | 17 | 8.13 | ||||
| 栓菌属 Trametes | 5 | 2.39 |
关闭全屏
No. 86 Xueyuan South Road, Haidian District, Beijing
010-62199257
qkjq@cast.org.cn
Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House
