In order to improve the solubility and meltability of polyimide (PI), a series of addition thermosetting fluorinated poly(imide-siloxane) copolymer resins (ABIS) were prepared from two kinds of synthesized trifluoromethyl-containing aromatic diamine monomers and 3,3′,4,4′-benzophenone tetracarboxylic acid dianhydride (BTDA), besides, aminopropyl-terminated polydimethylsiloxane (APPS) was chosen as flexible segment, and 3-aminophenyl acetylene (APA) was used as reactive end-capping agent. The structure of ABISs were characterized by proton nuclear magnetic resonance spectroscopy (¹H NMR) and Fourier transformation infrared spectroscopy (FTIR). The solubility, rheological behavior of ABIS and the thermal stability of the cured ABIS were further studied. Moreover, ABIS films were prepared by solution filming, and their physical properties were studied. ABIS resin matrix composites (T300CF/ABIS) were prepared by hot pressing using T300 carbon cloth as reinforcement, and their mechanical properties were also tested. The results show that the introduction of siloxane segment and trifluoromethyl group can significantly increase the flowability and solubility of PI resin systems. The introduction of fluorinated diamine decreases the 5% weight loss temperature (T_d5) of the cured ABIS, but its T_d5 is still higher than 425℃. At the same time, the residual yield at 800℃ (Y_r800℃) of ABIS resins reach 26%. The tensile strength and elongation at break of ABIS films are as high as 15.8 MPa and 65.3%, respectively. In the frequency range of 40 Hz-10⁷ Hz, the dielectric constant (ε) and dielectric loss factor (tanδ) of the PI films are 3.21 and 0.01, respectively, which keep unchanged basically. The contact angle of water on the cured ABIS film is 94°. The flexural strength and interlaminar shear strength (ILSS) of T300CF/ABIS composites can be 137.6 MPa and 16.6 MPa, respectively. The synthesized ABIS resin has promising applications in microelectronic devices and flexible heat-protective composites.