PDF
Full
Outline
An epoxy resin-based sheet molding plastic (E-SMC) was prepared by using multi-function epoxy resin as the resin matrix, dicyandiamide as main curing agent, and mica as fillers. Then the epoxy molding composite was prepared by molding process, and its mechanical properties, thermodynamic properties, and electrical properties were systematically tested and studied. The results show that the epoxy molding composites have high mechanical strength, and the tensile strength, bending strength, vertical compression strength and parallel compression strength of typical samples can reach 64, 178, 440, and 332 MPa, respectively. At the same time, the epoxy molding composites have low density (1.69-1.76 g/cm3), high glass transition temperature (Tg up to 201℃), and excellent electrical strength properties, and the breakdown voltage of typical samples is up to 100 kV, the electric strength can reach 17.1 kV/mm, the comparative tracking index (CTI) is 600 V.
PDF
139
61
| 科 Family | 属数 Number of genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) | 属 Genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) |
|---|---|---|---|---|---|---|
| 鹅膏菌科Amanitaceae | 2 | 11 | 5.26 | 鹅膏菌属 Amanita | 10 | 4.78 |
| 小菇科 Mycenaceae | 2 | 12 | 5.74 | 丝盖伞属 Inocybe | 5 | 2.39 |
| 多孔菌科 Polyporaceae | 8 | 14 | 6.70 | 蜡蘑属 Laccaria | 5 | 2.39 |
| 红菇科 Russulaceae | 3 | 23 | 11.00 | 小皮伞属 Marasmius | 6 | 2.87 |
| 小菇属 Mycena | 11 | 5.26 | ||||
| 光柄菇属 Pluteus | 5 | 2.39 | ||||
| 红菇属 Russula | 17 | 8.13 | ||||
| 栓菌属 Trametes | 5 | 2.39 |
关闭全屏
No. 86 Xueyuan South Road, Haidian District, Beijing
010-62199257
qkjq@cast.org.cn
Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House
