收藏切换
Preparation of New High Thermal Conductive Epoxy Potting Adhesive for Dry-type Transformer
收藏切换
PDF
Hao DONG1, Yu XIA2, Xinhai YU1, Yanting LIU2
Insulating Materials | 2021, 54(2) : 9 - 13
Less
收藏切换
Insulating Materials | 2021, 54(2): 9-13
Special Issue on Thermal Conductive Insulating
Preparation of New High Thermal Conductive Epoxy Potting Adhesive for Dry-type Transformer
Full
Hao DONG1, Yu XIA2, Xinhai YU1, Yanting LIU2
Affiliations
  • 1Department of Applied Chemistry, Donghua University, Shanghai 201620, China
  • 2Suzhou Jufeng Electrical Insulation System Limited, Suzhou 215200, China
Published: 2021-02-20 doi: 10.16790/j.cnki.1009-9239.im.2021.02.002
Outline
收藏切换

In order to develop a high thermal conductive epoxy potting adhesive for dry-type transformer, we prepared a potting adhesive by adding self-made modified silica to epoxy anhydride system. The thermal conductivity and electrical insulation performance were tested, and the suitable pouring temperature and best curing process of the potting adhesive were studied. The results show that when the filling content is 75%, the potting adhesive has high thermal conductivity and excellent electrical insulation performance, the thermal conductivity is 1.494 W/(m·K), the dielectric loss factor is only 0.41%. When the pouring temperature is 70℃, the potting adhesive has good pouring process, the viscosity is low than 2 800 MPa·s within 2 h. The best pouring process for potting adhesive is 80℃ vacuum/0.5 h + 80℃/4 h + 90℃/3 h + 110℃/2 h + 140℃/5 h. Under the condition, the deposition of powder in potting adhesive is small, and the cured product has the best comprehensive performance.

epoxy potting  /  thermal conductivity  /  curing technology
Hao DONG, Yu XIA, Xinhai YU, Yanting LIU. Preparation of New High Thermal Conductive Epoxy Potting Adhesive for Dry-type Transformer[J]. Insulating Materials, 2021 , 54 (2) : 9 -13 . DOI: 10.16790/j.cnki.1009-9239.im.2021.02.002
Year 2021 volume 54 Issue 2
PDF
115
49
Cite this Article
BibTeX
Article Info
doi: 10.16790/j.cnki.1009-9239.im.2021.02.002
  • Receive Date:2020-02-27
  • Online Date:2026-01-26
  • Published:2021-02-20
Article Data
Affiliations
History
  • Received:2020-02-27
  • Revised:2020-04-06
Affiliations
    1Department of Applied Chemistry, Donghua University, Shanghai 201620, China
    2Suzhou Jufeng Electrical Insulation System Limited, Suzhou 215200, China
References
Share
https://castjournals.cast.org.cn/joweb/jycl/EN/10.16790/j.cnki.1009-9239.im.2021.02.002
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT