收藏切换
Research on Circular plot analysis method and gear fault intelligent diagnosis based on time synchronous averaging
收藏切换
PDF
Yonggang XU1, Yifei ZHANG1, Guodong SUN2, Kun ZHANG1
Journal of Mechanical Strength | 2025, 47(6) : 11 - 16
Less
收藏切换
Journal of Mechanical Strength | 2025, 47(6): 11-16
Vibration·Noise·Monitoring·Diagnosis
Research on Circular plot analysis method and gear fault intelligent diagnosis based on time synchronous averaging
Full
Yonggang XU1, Yifei ZHANG1, Guodong SUN2, Kun ZHANG1
Affiliations
  • 1.Beijing Key Laboratory of Advanced Manufacturing Technology, Beijing University of Technology, Beijing 100124, China
  • 2.Shandong Institute of Scientific and Technical Information, Jinan 250101, China
Published: 2025-06-15 doi: 10.16579/j.issn.1001.9669.2025.06.002
Outline
收藏切换

Gear’s Circular plot is a result presentation method which needs to be combine with time synchronous averaging (TSA), which can clearly display gear meshing vibration waveform extracted by TSA. Aiming at the problem of parameter setting of gear’s Circular plot and lack of the quantitative index, Fi index for waveform edge recognition and Yi index based on Hu-moments were proposed. Firstly, TSA algorithm was used to extract the gear meshing vibration signal, and the upper and lower edges of the vibration signal waveform were determined by calculating the minimum Fi index. Secondly,Circular plot of gears were drawn by the upper and lower edge parameters. Then, the Circular plot of the gear was divided into four parts, and Yi index of the Circular plot was obtained by calculating Hu-moments of the picture after segmentation. Finally,based on the Yi and Fi indices extracted from the gear Circular plot, a K-nearest neighbors (KNN) classifier was utilized to classify the gear vibration signals. The results show that there is a significant difference between the Yi and Fi indices of the vibration signals of normal gears and those of abnormal gears. By combining with the KNN classifier,it is possible to distinguish between normal and abnormal gear signals,which proves the effectiveness of this method.

Gearbox  /  Gear Circular plot  /  Characteristic index  /  Intelligent fault diagnosis
Yonggang XU, Yifei ZHANG, Guodong SUN, Kun ZHANG. Research on Circular plot analysis method and gear fault intelligent diagnosis based on time synchronous averaging[J]. Journal of Mechanical Strength, 2025 , 47 (6) : 11 -16 . DOI: 10.16579/j.issn.1001.9669.2025.06.002
  • Young Scientists Fund of the National Natural Science Foundation of China(52405083)
Year 2025 volume 47 Issue 6
PDF
59
29
Cite this Article
BibTeX
Article Info
doi: 10.16579/j.issn.1001.9669.2025.06.002
  • Receive Date:2023-09-22
  • Online Date:2026-03-18
  • Published:2025-06-15
Article Data
Affiliations
History
  • Received:2023-09-22
  • Revised:2023-12-06
Funding
Young Scientists Fund of the National Natural Science Foundation of China(52405083)
Affiliations
    1.Beijing Key Laboratory of Advanced Manufacturing Technology, Beijing University of Technology, Beijing 100124, China
    2.Shandong Institute of Scientific and Technical Information, Jinan 250101, China

Corresponding:

ZHANG Kun, E-mail:
References
Share
https://castjournals.cast.org.cn/joweb/jxqd/EN/10.16579/j.issn.1001.9669.2025.06.002
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT