收藏切换
Research on unbalancing force approach of the geotechnical centrifuge based on pretension measurement of bolts
收藏切换
PDF
Hongyong CHEN1, 2, Hongpan NIU1, 2, Qisheng LI1, Yuming YANG1, 2, Qiong SONG1, Xinyao LI1
Journal of Mechanical Strength | 2025, 47(1) : 107 - 112
Less
收藏切换
Journal of Mechanical Strength | 2025, 47(1): 107-112
Experimental Research·Testing Technology
Research on unbalancing force approach of the geotechnical centrifuge based on pretension measurement of bolts
Full
Hongyong CHEN1, 2, Hongpan NIU1, 2, Qisheng LI1, Yuming YANG1, 2, Qiong SONG1, Xinyao LI1
Affiliations
  • 1.Institute of Systems Engineering, Chinese Academy of Engineering Physics, Mianyang 621999, China
  • 2.Sichuan Key Laboratory of Impact and Vibration of Engineering Materials and Structures, Mianyang 621999, China
Published: 2025-01-15 doi: 10.16579/j.issn.1001.9669.2025.01.012
Outline
收藏切换

An online measurement method of a dynamic unbalance force of the geotechnical centrifuge was carried out based on monitoring the change of the axial preload of anchor bolts. Firstly, the change model of the axial preload of the anchor bolt under different unbalanced force states was deduced theoretically, which proved the feasibility of indirectly measuring the unbalanced force of the centrifuge. Then, the typical testing case was carried out on the TLJ-500 centrifuge, and the law of the dynamic unbalance moment changing with the counterweight was obtained. By fitting the change of the axial force at the measuring point, the relation between the axial force at the measuring point and the unbalance mass and the running gravitational acceleration g value of the centrifuge was established. Finally, the relation between the change of the axial preload of anchor bolts, acceleration of the centrifuge and counterweight mass were obtained by measuring the preload change of one anchor bolt and fitting the response surface. The results show that it is feasible to obtain the unbalanced force of the centrifuge operation by monitoring the change of anchor bolts’ pre-tightening force,and the centroids of different counterweights should be kept consistent in the test. When calculating the counterweight mass to balance the rotating arm according to the fitting formula, a larger acceleration should be used as far as possible to reduce the error caused by the centrifuge not being leveled.

Anchor bolt  /  Axial pretension force  /  Geotechnical centrifuge  /  Unbalancing force  /  Fitted model
Hongyong CHEN, Hongpan NIU, Qisheng LI, Yuming YANG, Qiong SONG, Xinyao LI. Research on unbalancing force approach of the geotechnical centrifuge based on pretension measurement of bolts[J]. Journal of Mechanical Strength, 2025 , 47 (1) : 107 -112 . DOI: 10.16579/j.issn.1001.9669.2025.01.012
Year 2025 volume 47 Issue 1
PDF
81
42
Cite this Article
BibTeX
Article Info
doi: 10.16579/j.issn.1001.9669.2025.01.012
  • Receive Date:2023-02-28
  • Online Date:2026-03-18
  • Published:2025-01-15
Article Data
Affiliations
History
  • Received:2023-02-28
  • Revised:2023-10-06
Affiliations
    1.Institute of Systems Engineering, Chinese Academy of Engineering Physics, Mianyang 621999, China
    2.Sichuan Key Laboratory of Impact and Vibration of Engineering Materials and Structures, Mianyang 621999, China

Corresponding:

NIU Hongpan, E-mail:
References
Share
https://castjournals.cast.org.cn/joweb/jxqd/EN/10.16579/j.issn.1001.9669.2025.01.012
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT