born in 1996. PhD, assistant professor. His main research interests include machine learning-assisted electronic design automation (EDA) algorithms, including microarchitecture power modeling, design space exploration, and physical design
born in 2000. Bachelor. His main research interests include computer architecture and power modeling
born in 1998, PhD candidate. His main research interests include computer architecture and electronic design automation
born in 1982, PhD, professor, PhD supervisor. Senior member of CCF. His main research interests include electronic design automation (EDA), compiling optimization for FPGA, and heterogenous computing systems
born in 1983. PhD, associate professor, PhD supervisor. His main research interests include electronic design automation (EDA) and machine learning
Microarchitecture design is a key stage of processor development. It is at the upper level of the entire design flow and directly affects core metrics such as performance, power consumption, and cost. Over the past few decades, new microarchitecture solutions, coupled with advances in semiconductor manufacturing, have enabled newer generations of processors to achieve higher performance, lower power consumption and cost. However, as chip design enters the post-Moore era, the dividends from the evolution of semiconductor technology are increasingly limited, and power consumption has become a major challenge for energy-efficient processor design. Meanwhile, modern processors are becoming more complex in architecture and the design space is larger, requiring designers to make accurate design metrics tradeoffs to achieve the most desirable microarchitecture design. Moreover, the existing stage-by-stage decomposition of the development and validation flow is extremely lengthy and time-consuming, and it is difficult to achieve global energy efficiency optimization. Therefore, how to perform accurate and efficient power estimation and design space exploration at the microarchitecture design stage becomes a key issue. To tackle these challenges, machine learning has been introduced into the microarchitecture design process, providing efficient and accurate solutions for microarchitecture modeling and optimization. We firstly introduce the main design flow of processors, microarchitecture design and its major challenges, then amplify machine learning-assisted integrated circuit design, which focuses on research advances in the use of machine learning techniques to assist microarchitecture power modeling and design space exploration, and finally conclude with a summary and outlook.
| 科 Family | 属数 Number of genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) | 属 Genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) |
|---|---|---|---|---|---|---|
| 鹅膏菌科Amanitaceae | 2 | 11 | 5.26 | 鹅膏菌属 Amanita | 10 | 4.78 |
| 小菇科 Mycenaceae | 2 | 12 | 5.74 | 丝盖伞属 Inocybe | 5 | 2.39 |
| 多孔菌科 Polyporaceae | 8 | 14 | 6.70 | 蜡蘑属 Laccaria | 5 | 2.39 |
| 红菇科 Russulaceae | 3 | 23 | 11.00 | 小皮伞属 Marasmius | 6 | 2.87 |
| 小菇属 Mycena | 11 | 5.26 | ||||
| 光柄菇属 Pluteus | 5 | 2.39 | ||||
| 红菇属 Russula | 17 | 8.13 | ||||
| 栓菌属 Trametes | 5 | 2.39 |