收藏切换
A Reconfigurable Single-Precision Approximate Floating-Point Multiplier Design
收藏切换
Pengcheng Li1, 2, Libo Huang1, 2, *, Gang Chen3, Mingche Lai1, 2, Lin Deng1, 2, Wei Liu1, 2, Qianming Yang1, 2, Yongwen Wang1, 2
Journal of Computer Research and Development | 2025, 62(6) : 1581 - 1593
Less
收藏切换
Journal of Computer Research and Development | 2025, 62(6): 1581-1593
• Chip Architecture Design •
A Reconfigurable Single-Precision Approximate Floating-Point Multiplier Design
Full
Pengcheng Li1, 2, Libo Huang1, 2, *, Gang Chen3, Mingche Lai1, 2, Lin Deng1, 2, Wei Liu1, 2, Qianming Yang1, 2, Yongwen Wang1, 2
Affiliations
  • 1College of Computer Science and Technology, National University of Defense Technology, Changsha 410073
  • 2Key Laboratory of Advanced Microprocessor Chips and Systems (National University of Defense Technology), Changsha 410073
  • 3School of Computer Science and Engineering, Sun Yat-sen University, Guangzhou 510275
  • born in 1995. Master candidate. His main research interest includes computer architecture

    born in 1983. PhD, professor. Senior member of CCF. His main research interests include computer architecture and microprocessor design

    born in 1985. PhD, professor. Senior member of CCF. His main research interests include artificial intelligence, accelerator design, and embedded systems

    born in 1982. PhD, professor. Member of CCF. His main research interest includes computer architecture

    born in 1980. PhD, associate professor. Member of CCF. His main research interests include computer architecture and high-performance processor design

    born in 1986. PhD, assistant professor. Member of CCF. His main research interest includes microprocessor design

    born in 1984. PhD, assistant professor. Member of CCF. His main research interest includes computer architecture

    born in 1977. PhD, professor. Senior member of CCF. His main research interest includes microprocessor architecture

About Author:

born in 1995. Master candidate. His main research interest includes computer architecture

born in 1983. PhD, professor. Senior member of CCF. His main research interests include computer architecture and microprocessor design

born in 1985. PhD, professor. Senior member of CCF. His main research interests include artificial intelligence, accelerator design, and embedded systems

born in 1982. PhD, professor. Member of CCF. His main research interest includes computer architecture

born in 1980. PhD, associate professor. Member of CCF. His main research interests include computer architecture and high-performance processor design

born in 1986. PhD, assistant professor. Member of CCF. His main research interest includes microprocessor design

born in 1984. PhD, assistant professor. Member of CCF. His main research interest includes computer architecture

born in 1977. PhD, professor. Senior member of CCF. His main research interest includes microprocessor architecture

Published: 2025-06-02 doi: 10.7544/issn1000-1239.202550116
Outline
收藏切换

The rapid development of artificial intelligence (AI) and Internet of things (IoT) technologies has increased demands for the computing energy efficiency, and terminal devices are also facing great challenges in terms of hardware resource overhead. In order to solve the problem of energy efficiency, new designs of approximate computing units with low power have been widely studied. In application scenarios such as digital signal processing and image processing, there are a large number of floating-point operations. These applications consume a lot of hardware resources. However, they have certain fault tolerance characteristics and do not have to perform accurate calculations. In this paper, we propose a 32-bit single-precision reconfigurable approximate floating-point multiplier design method based on multiplication to shift addition (MTA) and asymmetric truncation. Firstly, we utilize an efficient and low-power approximate algorithm that transforms multiplication into shift-addition for partial operands. Secondly, to ensure a balance between accuracy and cost, we propose asymmetric truncation processing for the most significant bits (MSBs) and perform precise calculations on the truncated retained parts. The design achieves high precision and low power. A wide design space is generated by combining the MTA algorithm with different bit widths and varying the number of rows in the partial product array after truncation. This allows for various trade-offs between accuracy and cost. Compared with the exact floating-point multiplier, MTA5T5 has an accuracy loss of mean relative error distance (MRED) of only about 0.32%, a power reduction of 85.80%, and an area reduction of about 79.53%. The accuracy loss of MTA3T3 with lower accuracy is about 1.92%, while the power and area decrease to 90.55% and 85.80%, respectively. Ultimately, we test the application of FIR filtering and image processing, and the results show that the proposed design has significant advantages in terms of accuracy.

approximate floating-point multiplier  /  MTA  /  asymmetric truncation  /  accuracy  /  cost
李鹏程, 黄立波, 陈刚, 赖明澈, 邓林, 刘威, 杨乾明, 王永文. 一种可重构的单精度近似浮点乘法器设计. 计算机研究与发展, 2025 , 62 (6) : 1581 -1593 . DOI: 10.7544/issn1000-1239.202550116
Pengcheng Li, Libo Huang, Gang Chen, Mingche Lai, Lin Deng, Wei Liu, Qianming Yang, Yongwen Wang. A Reconfigurable Single-Precision Approximate Floating-Point Multiplier Design[J]. Journal of Computer Research and Development, 2025 , 62 (6) : 1581 -1593 . DOI: 10.7544/issn1000-1239.202550116
Year 2025 volume 62 Issue 6
154
68
Cite this Article
BibTeX
Article Info
doi: 10.7544/issn1000-1239.202550116
  • Receive Date:2025-02-26
  • Online Date:2026-11-10
  • Published:2025-06-02
Article Data
Affiliations
History
  • Received:2025-02-26
  • Revised:2025-04-15
Affiliations
    1College of Computer Science and Technology, National University of Defense Technology, Changsha 410073
    2Key Laboratory of Advanced Microprocessor Chips and Systems (National University of Defense Technology), Changsha 410073
    3School of Computer Science and Engineering, Sun Yat-sen University, Guangzhou 510275
References
Share
https://castjournals.cast.org.cn/joweb/jsjyjyfz/EN/10.7544/issn1000-1239.202550116
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT