收藏切换
Calibration device for thermocouple response time constant based on gas temperature step method
收藏切换
PDF
Ran JIN1, Yuqi HUANG1, 1, Liang ZHU2
Metrology & Measurement Technology | 2025, 45(6) : 86 - 94
Less
收藏切换
Metrology & Measurement Technology | 2025, 45(6): 86-94
Sensor Technology
Calibration device for thermocouple response time constant based on gas temperature step method
Full
Ran JIN1, Yuqi HUANG1, 1, Liang ZHU2
Affiliations
  • 1Guizhou Aerospace Institute of Measuring and Testing Technology, Guiyang 550000, China
  • 2Guizhou Normal University, Guiyang550000, China
Published: 2025-12-28 doi: 10.11823/j.issn.1674-5795.2025.06.07
Outline
收藏切换

To address the calibration demand for the response time constant of fast⁃response K⁃type thermocouples under gas medium conditions, a calibration device based on the gas temperature step method was developed. Key para⁃meters including heater power, orifice area, and nozzle flow rate were determined via theoretical calculations, and Ansys Fluent software was utilized for simulation to optimize the structure of the step temperature generation module. A calibration method based on synchronous dynamic pressure monitoring was proposed, which takes the pressure step moment as the reference to eliminate non⁃ideal excitation interference and ensure the calculation accuracy of the response time constant. Experimental tests were conducted using the developed device, and the results indicate that the gas temperature step amplitude generated by the device exceeds 200 ℃ with a temperature step excitation time of approximately 2.2 ms. The device can effectively calibrate the response time constant of K⁃type thermocouples with different wire diameters, demonstrating a significant engineering application value.

gas temperature step method  /  thermocouple  /  response time constant  /  calibration device  /  step amplitude  /  excitation time  /  simulation analysis  /  waveform test
Ran JIN, Yuqi HUANG, Liang ZHU. Calibration device for thermocouple response time constant based on gas temperature step method[J]. Metrology & Measurement Technology, 2025 , 45 (6) : 86 -94 . DOI: 10.11823/j.issn.1674-5795.2025.06.07
Year 2025 volume 45 Issue 6
PDF
121
58
Cite this Article
BibTeX
Article Info
doi: 10.11823/j.issn.1674-5795.2025.06.07
  • Receive Date:2025-10-14
  • Online Date:2026-04-09
  • Published:2025-12-28
Article Data
Affiliations
History
  • Received:2025-10-14
  • Revised:2025-11-10
Affiliations
    1Guizhou Aerospace Institute of Measuring and Testing Technology, Guiyang 550000, China
    2Guizhou Normal University, Guiyang550000, China
References
Share
https://castjournals.cast.org.cn/joweb/jcjs/EN/10.11823/j.issn.1674-5795.2025.06.07
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT