Home Latest Articles
Latest Articles
  • Runyan WANG, Yongkui WAN, Zhaoxuan GUAN, Shaohua HUANG, Peiyuan GU, Zeyao SONG, Mingyue ZHOU
    Journal of Geomechanics. 2025, 31(2): 223-234.
    Objective

    Coulomb stress change is an important tool for studying earthquake triggering effects and assessing seismic hazard. In order to study the triggering of the static Coulomb Failure Stress(CFS) of the M 6.9 earthquake in Morocco on September 9, 2023, the study determined the geometric configuration and slip properties of the seismogenic fault, analyzed the co-seismic displacement field and surface strain field generated by the earthquake, and evaluated the triggering effects of the mainshock on aftershocks and surrounding faults, revealing the impact of this earthquake on regional seismic activity.

    Methods

    Using the "central solution" algorithm, two possible nodal planes of the earthquake were determined, and the local stress field was projected onto these two planes. The nodal plane with higher Coulomb stress was selected as the seismogenic fault plane (strike 253.44°, dip 45.43°, rake 81.05°). Based on statistical formulas, the slip properties of the seismogenic fault plane were determined. Under the homogeneous elastic half-space theoretical model, the co-seismic displacement field and areal strain field of the region were constructed. Subsequently, assuming that the focal mechanisms of the aftershocks on the receiver faults were consistent with the mainshock, the triggering effect of the mainshock on the aftershocks was calculated. Finally, the Coulomb stress changes induced by the mainshock on the surrounding faults were computed to assess the seismic hazard.

    Results

    The results show that the material at the epicenter moved outward, while the material on the north and south sides moved inward, resulting in uplift at the epicenter and slight subsidence on the north and south sides. The static Coulomb stress generated by the mainshock promoted the occurrence of most shallow aftershocks, with a large number of aftershocks located in areas of high Coulomb stress change. Additionally, the western and southwestern segments of the South Atlas Fault, the southern segment of the North Atlas Fault, and the western segment of the South Sous Fault all exhibited Coulomb stress change values exceeding the 0.01 MPa threshold, indicating a very high seismic hazard that warrants attention.

    Conclusion

    The study demonstrates that the static CFS generated by the M 6.9 earthquake in Morocco significantly influenced the surrounding seismic activity. The mainshock not only promoted the occurrence of aftershocks but also increased the stress on surrounding faults, particularly in the western and southwestern segments of the South Atlas Fault, the southern segment of the North Atlas Fault, and the western segment of the South Sous Fault. [Significance] The study not only assessed the seismic hazard in the region but also provided a foundational dataset for geodynamic research in the area. It contributes to enhancing earthquake monitoring, prediction, and risk mitigation capabilities, promotes the formulation of relevant policies, and safeguards people's lives and property. Therefore, an in-depth exploration of earthquake triggering is of great significance for strengthening post-earthquake scientific research and improving society's ability to respond to earthquakes.

  • Shaowei HUO, Xingqiang FENG, Jian WU, Shouren ZHANG, Lei ZHOU, Zhuliang QIAN, Weiwei CHAO
    Journal of Geomechanics. 2025, 31(2): 235-247.
    Objective

    The deep coalbed methane in the Linxing area at the eastern margin of the Ordos Basin has great potential for exploration and development and has become a key exploration and development target. Research shows that the hanging- and foot-wall beds of the coal seams play an important role in the enrichment and preservation of coalbed methane. At present, there is lack of systematic research on the influence of the hanging- and foot-wall beds of deep coal seams on the gas content, and the coupling between them is not clear. This study aims to extend the theory of methane enrichment in deep coal beds.

    Method

    Through the comprehensive application of logging, drilling, and mud logging data and the use of the Analytic Hierarchy Process (AHP), the coupling between the characteristics of the hanging- and foot-wall beds of the No. 8+9 coal seam and its gas-bearing property were studied.

    Results

    The research results are as follows: (1) In the Linxing area, the Benxi Formation–Taiyuan Formation developed in a barrier-tidal flat-lagoon sedimentary system. The No. 8+9 coal seam mainly developed in the supratidal zone, peat flat, and peat swamp, and the sedimentary environments of the hanging- and foot-wall beds are sedimentary microfacies such as mud flat, lagoon, ash flat, and sand flat. (2) Influenced by the sedimentary environments, the hanging- and foot-wall beds are mainly composed of three lithologies, namely limestone, mudstone, and sandstone. The thicknesses of the hanging- and foot-wall beds of the coal seam vary greatly along the lateral extent. The thickness of the hanging-wall bed ranges from 1.90 to 19.00 m, and the thickness of the foot-wall bed ranges from 1.99 to 21.19 m. There are seven different lithological combinations of the hanging- and foot-wall beds, including top-limestone bottom-mud, top-mud bottom-limestone, top-mud bottom-mud, top-mud bottom-sand, top-sand bottom-limestone, top-sand bottom-mud, and top-sand bottom-sand. (3) Further research on the relationship between the characteristics of the hanging- and foot-wall and the gas content of the coal seam shows that the coal seams in top-limestone bottom-mud, top-mud bottom-limestone, and top-mud bottom-mud associations exhibit the highest gas contents; the coal seams in top-mud bottom-sand and top-sand bottom-limestone associations exhibit relatively high gas contents; the coal seams in top-sand bottom-mud and top-sand bottom-sand associations exhibit low gas contents. Within the same lithology, the greater the thickness of the hanging- and foot-wall beds, the higher the gas content of the coal seam, and there is a positive correlation between the thicknesses of the hanging- and foot-wall beds and the gas content.

    Conclusion

    According to the research results, three types of coupling models between the hanging- and foot-wall of deep coal seams and their gas-bearing properties are distinguished: Type I (good coupling) with a gas content of more than 15 m³/t, Type II (relatively good coupling) with a gas content of 12 to 15 m³/t, and Type III (poor coupling) with a gas content of less than 12 m³/t. [Significance] The research results have clarified the controlling effect of the hanging- and foot-wall beds of deep coal seams on the gas content, which has important significance for guiding the evaluation, optimization, and mining of areas favorable for deep coalbed methane, and further extends the theory of deep coalbed methane enrichment.

  • Yufang WANG, Gangyi ZHAI, Wanzhong SHI, Jinzhu WANG, Jiazheng ZHANG, Haixia KANG, Yunxiao ZHANG, Hui ZHOU, Shuting ZHANG
    Journal of Geomechanics. 2025, 31(2): 248-266.
    Objective

    Compared with the Wufeng-Longmaxi Formation in the Sichuan Basin and its periphery, the Yunnan-Guizhou-Guangxi region has more complex conditions for the enrichment and accumulation of shale gas. Currently, the exploration degree of shale gas in the Yunnan-Guizhou-Guangxi region is relatively low, and the main factors controlling the enrichment and accumulation of shale gas are unclear.

    Methods

    This paper relies on a large number of studies from the basic surveys of shale gas and major special projects in the Yunnan-Guizhou-Guangxi region. The research includes the sedimentary characteristics, diagenesis, hydrocarbon generation, thermal evolution characteristics, shale reservoir characteristics, accumulation patterns, and preservation conditions of the Devonian-Carboniferous shale in the Yunnan-Guizhou-Guangxi region.

    Results

    The research indicated that the deposition of Devonian-Carboniferous organic-rich shale was mainly controlled by rift troughs, and the sweet spots of organic-rich shale were mainly formed in the transgressive system tract and the early highstand system tract of deep-water facies sedimentation. The regional sea level rise has brought abundant nutrients, promoting the wealth of organisms in the water body and generating strong biological productivity, which provides a good material basis for the formation of organic-rich sediments. Seismic interpretation reveals that most of the areas distributed along the main rift trough are greatly affected by destruction by late-stage tectonic activities, leading to the deterioration of the preservation conditions of shale gas. In contrast, the secondary rift troughs around the main rift trough have relatively stable structures, providing good conditions for the preservation of shale gas.

    Conclusion

    On this basis, the main controlling model for the enrichment and accumulation of shale gas in the Devonian-Carboniferous system in the Yunnan-Guizhou-Guangxi region is proposed: "rift trough deposition, deep-water lithofacies controlled hydrocarbon generation, and structural preservation in secondary rift troughs". The model has been confirmed through the drilling of multiple wells. [Significance] The results of this research can be used as a guide for the optimal selection of favorable shale gas areas and for the drilling of parameter wells in the future.

  • Lina RAN, Yongshuang ZHANG, Sanshao REN, Jinqiu LI
    Journal of Geomechanics. 2025, 31(2): 267-277.
    Objective

    The tectonic suture zone of the Qinghai-Tibet Plateau has a complex rock mass structure and special lithology combination and is thus prone for large landslides. However, many factors influence the formation and evolution of landslides in altered ophiolite. Their formation mechanism is not clear at present, which restricts an effective identification and disaster risk prevention.

    Methods

    Taking the Duirongtong (DRT) landslide in the Jinsha River tectonic suture zone as an example, field investigations, UAV mapping, geochronological analysis, ring-shear testing, and numerical simulation were performed to analyze the formation mechanisms of the landslide and evaluate the stability of the landslide deposits.

    Results

    The results show that: (1) The DRT landslide is a giant landslide formed in the late Pleistocene. The slope is mainly composed of basic-ultrabasic rocks, and several clay-altered ophiolitic bands are developed, forming a sliding-prone geo-structure. (2) The clay-altered ophiolite has low shear strength under natural conditions, and its shear strength drops sharply when exposed to water. The natural values of c and φ are 67.0 kPa and 20.3°, and the water-saturated values of cohesion(c) and angle of internal friction(φ) are 39.8 kPa and 13.83°. The DRT landslide is currently stable as a whole, but the leading edge of the landslide may experience movement under heavy rainfall. Based on numerical simulation, some preventive recommendations are proposed.

    Conclusion

    The study suggests that the formation and evolution of the DRT landslide are controlled by the combination of geological structure and clay-altered rock. [Significance] These findings have important implications for the slope stability analysis and disaster prevention in the tectonic suture zone of the Qinghai-Tibet Plateau.

  • Haoyue ZHANG, Qunou JIANG, Xujiao ZHANG, Shan WANG
    Journal of Geomechanics. 2025, 31(2): 278-286.
    Objective

    Karst caves, as an essential part of the Earth's Critical Zone, hold significant scientific and scenic value. However, previous studies have largely overlooked the tectonic factors influencing cave formation, and quantitative constraints on the age of cave formation remain scarce. This study aims to investigate the genesis and chronology of the Xinglong Karst Cave in the Taojiatai area of Hebei Province, elucidating the controlling factors and temporal constraints of cave development.

    Methods

    A comprehensive investigation of cave morphology, stratigraphic attitude, and tectonic characteristics was conducted, supplemented by mineralogical analysis using X-ray diffraction and geochemical element analysis. The study analyzed the relationship between cave formation and fault activity, while the geochemical composition of red clay deposits inside the cave was compared with external weathering crusts to constrain the formation age of the cave.

    Results

    The cave developed within Middle Proterozoic dolomitic limestone containing flint nodules, influenced by two major faults that facilitated differential dissolution along fault planes. The red clay deposits inside the cave share geochemical characteristics with external weathering crusts, indicating an exogenous origin. The enrichment of iron in red stalactites suggests leaching from surface water, further confirming the post-weathering deposition of the red clay. Regional comparisons reveal that the residual red clay outside the cave corresponds to the Tangxian planation period (3.1–3.7 Ma), indicating that the cave must have formed after this period.

    Conclusion

    This study provides new insights into the fault-controlled genesis of the Xinglong Karst Cave and establishes a minimum formation age of 3.7 Ma, significantly younger than the Middle Proterozoic age of the host rock. The findings correct the previous misconception that the cave formed during the Proterozoic and highlight the crucial role of tectonic activity in cave development. [Significance] This research enhances our understanding of the tectonic control and chronological constraints of karst cave formation, providing valuable references for the study of karst landscapes in other regions.

  • Guohua XIONG, Lingyun JI, Yuxin CHEN, Liangyu ZHU, Chuanjin LIU, Jing XU, Fengyun JIANG, Guobin XU
    Journal of Geomechanics. 2025, 31(2): 287-300.
    Objective

    On October 24, 2023, an MS 5.5 earthquake occurred in Subei County, Jiuquan City, Gansu Province. The epicenter was located in the Qilian mountain seismic belt at the northeastern margin of the Qinghai-Tibet Plateau. Understanding the seismogenic mechanism of this earthquake and its relationship with the tectonic stress field is crucial for analyzing the seismic hazard in the region.

    Methods

    The InSAR coseismic deformation field of the MS5.5 earthquake in Subei was obtained using ascending and descending Sentinel-1 SAR data, and the parameters of the seismogenic fault were determined based on a uniform slip model. Subsequently, a distributed slip inversion method was applied to obtain a detailed slip distribution of the seismogenic fault. Furthermore, the earthquake-induced changes in the Coulomb stress and the regional interseismic strain rate were determined.

    Results

    The results indicate that the surface deformation values generated by this earthquake reached 12 cm and 9 cm in the ascending and descending InSAR line of sight, respectively. The deformation primarily manifests as surface uplift; the seismogenic fault is a concealed fault located between the Shule Nanshan Fault and the northern margin fault of the Central Qilian, the strike is approximately 166.97°, the dip angle is around 68.69°, and the slip angle is about 110.39°; the fault slip is primarily concentrated within the depth range of 1.2 km to 4.9 km, with a maximum slip of 0.58 m occurring at a depth of approximately 2.56 km; the moment magnitude obtained from the inversion is MW 5.6, and the coseismic rupture is primarily characterized by thrust motion with a minor component of right-lateral strike-slip. This seismic event resulted in regional Coulomb stress changes between the northern margin fault of the Central Qilian and the Shule Nanshan Fault, as well as in the northern area of the Shule River Fault Zone. Additionally, the regional surface strain rate exhibited a distinct compressive trend before the earthquake, with higher surface strain and maximum shear strain rates observed on the northern side of the seismic zone.

    Conclusion

    The continuous accumulation of strain leads to an increased seismic hazard, with historical earthquakes often occurring in gradient zones where strain values transition from high to low. Considering the regional strain distribution characteristics and seismic activity, the seismic hazard in this area remains significant in the future and should not be overlooked. [Significance] The research findings have a certain guiding significance for understanding the tectonic background of the Qilian Block and its seismic hazard.

  • Xingang QIANG, Changbao GUO, Dongxia SUN, Jian’en HAN, Guangze ZHANG, Min ZHANG, Zhendong QIU, Ping HE
    Journal of Geomechanics. 2025, 31(2): 301-312.
    Objective

    The Plateau Railway, constructed along the Yarlung Zangbo suture zone on the Qinghai-Tibet Plateau, crosses the active Cuona-Woka Fault Zone. Coseismic surface rupture caused by the active fault leads to engineering breaks, tunnel deformation, and geological disasters; it poses a significant geological safety risk during railway operation.

    Methods

    Based on remote sensing, field investigation, and published research, this paper analyzes the development characteristics, activity, and impact of the Cuona-Woka Fault Zone on the Plateau Railway that it intersects.

    Results

    The study shows that the Cuona-Woka Fault Zone consists of five northeast-trending branch faults. The western boundary faults of the Woka Basin (F2-1, F2-2) show Late Pleistocene activity, the eastern boundary faults of the Woka Basin (F2-4, F2-5) have Holocene activity, and the F2-3 fault within the basin is the seismogenic fault of the 1915 MS 7.0 Sangri earthquake. Based on the deformation signs caused by fault activity and the types of active faults, it is estimated that future coseismic surface ruptures of the branch faults of the Cuona-Woka Fault Zone may cause deformation and damage to the Zangga tunnel and the Sangzhuling tunnel, which cross the fault zone, with an impact width of approximately 16~30 m.

    Conclusion

    Therefore, it is recommended to strengthen research on geological safety risk prevention measures for strong seismic deformation and engineering breaks in the sections of the Plateau Railway crossing the active fault zone. [Significance] The results of the study provide guidance for safe operation and disaster prevention and mitigation of the Plateau Railway, as well as a reference for the impact assessment of active fault engineering on other railway lines.

  • Yang ZHANG, Lin SHANG, Miao WANG, Haitao WU, Bin DUAN
    Journal of Geomechanics. 2025, 31(2): 313-324.
    Objective

    The evaluation of regional tectonic stability plays a crucial role in the planning and construction of major projects. Given that the Nanpu sag is the site for China's first offshore gas storage facility, its tectonic stability is naturally a focal point of concern.

    Methods

    Based on historical seismic data for the region, this study summarizes the spatiotemporal distribution of seismic activities in the Nanpu sag and its surrounding areas. It analyzes the rupture modes of the Tangshan−Hejian−Cixian fault zone and the Zhangjiakou−Penglai fault zone, and explores the tectonic stability of the Nanpu sag.

    Results

    The results indicate that the Nanpu sag is a relatively stable "safe island" near active tectonic zones. Regionally, stress accumulated around the periphery of the Nanpu sag is mainly released through the activity of faults such as the Luanxian−Laoting and Baodi−Ninghe faults, and the influence of the seismic activity at the periphery on the interior of the Nanpu sag is limited. Internally, a large-scale creep-dominated extensional deformation system has developed within the Nanpu sag.

    Conclusion

    Given the current tectonic stress background, only a small magnitude of stress accumulation is required to trigger unstable sliding of pre-existing normal faults within the Nanpu sag. This suggests that stress cannot accumulate over long time scales, and thus the interior of the Nanpu sag lacks conditions for the occurrence of major earthquakes.

  • Yuan GAO, Ying WANG, Hai WANG, Zhe XU, Yong ZHANG, Yu ZHOU, Fangrong ZHANG, Chao SUN, Bin HE, Siyuan ZHANG, Fushen ZHANG
    Journal of Geomechanics. 2025, 31(2): 325-339.
    Objective

    The composite Zhukeng granite is composed of two-mica granite and muscovite granite and closely related to tungsten and niobium-tantalum deposits in southern Jiangxi Province.

    Methods

    Based on systematic lithogeochemical analysis and rock-forming age determination of muscovite granite and two-mica granite from the Zhukeng tungsten deposit, combined with regional studies concerning diagenesis and mineralization, the genesis and tectonic setting of the rock mass are discussed.

    Result

    The LA-ICP-MS analysis of monazite from the fine-grained muscovite granite yielded a 206Pb/238U weighted average U-Pb age of 156.7 ± 1.3 Ma. Major elements exhibit high silica contents (SiO2 ranging from 65.54% to 74.95%), high alkalis contents (Na2O+K2O ranging from 8.48% to 12.85%), high aluminum contents (A/CNK ratios ranging from1.10 to 1.22), and low magnesium contents. The total rare earth elements (ΣREE) range from 61.12×10−6 to 173.98×10−6, and there are right-dipping light rare earth enrichment patterns with a weak negative Eu anomalies. The trace elements Rb, Ta, Th, Pb, Nd, and Hf are enriched, while Ba, Nb, Sr, and Ti are depleted, indicating a highly differentiated S-type granite. The LA-ICP-MS analysis of monazite U-Pb from the two-mica granite yielded an 206Pb/238U weighted average age of 159.5 ± 0.5 Ma. Major elements exhibit high silica contents (SiO2 ranging from 75.02% to 77.03%), high alkalis contents (Na2O+K2O ranging from 5.92% to 8.58%), high aluminum contents (A/CNK ranging from 1.14 to 1.65), and low magnesium contents. Total rare earth elements (ΣREE) range from 106.86×10−6 to 124.24×10−6, and there are right-dipping light rare earth enrichment patterns with a significant negative Eu anomalies. The trace elements Rb, Ta, Th, Pb, Nd, and Hf are enriched, while Ba, Nb, Sr, and Ti are depleted, suggesting a highly differentiated S-type granite.

    Conclusion

    By combining geochronological and lithogeochemical characteristics, the authors conclude that the Zhukeng tungsten deposit formed during an Upper Jurassic mineralization event caused by large-scale granitic magmatic activity related to subduction.

  • Chengguang HE, Wenjian ZHAI, Yanhui WANG, Jiande REN, Shiqi ZHANG, Kun WANG, Yehao HUANG
    Journal of Geomechanics. 2025, 31(2): 340-344.