收藏切换
Research on high-precision one-dimensional geomechanical modeling of shale oil reservoirs
收藏切换
Shuoyang HOU1, 2, Xiaoqiong WANG1, *, Chenggang XIAN1, Hongkui GE1, Yi ZHONG3
Journal of Geomechanics | 2026, 32(2) : 469 - 480
Less
收藏切换
Journal of Geomechanics | 2026, 32(2): 469-480
• Energy Resources Geology •
Research on high-precision one-dimensional geomechanical modeling of shale oil reservoirs
Full
Shuoyang HOU1, 2, Xiaoqiong WANG1, *, Chenggang XIAN1, Hongkui GE1, Yi ZHONG3
Affiliations
  • 1State Key Laboratory of Petroleum Resources and Engineering, China University of Petroleum (Beijing), Beijing 102249, China
  • 2College of Petroleum Engineering, China University of Petroleum (Beijing), Beijing 102249, China
  • 3CNPC Engineering Technology R&D Company Limited, Beijing 102206, China
Published: 2026-04-28 doi: 10.12090/j.issn.1006-6616.2025094
Outline
收藏切换
Objective

The sweet spot intervals of shale oil reservoirs exhibit rapid vertical variations, centimeter-scale thin interbeds, well-developed bedding planes and strong anisotropy. Therefore, traditional isotropic models are inadequate for detailed geomechanical modeling and characterization, posing significant challenges for reservoir stimulation and hydraulic fracturing design.

Methods

Geomechanics is key to the cost-effective development of oil and gas reservoirs with complex geological features. To establish a high-precision 1D geomechanical model, anisotropy experiments were conducted on shale oil reservoirs in the laboratory, and well log data were then used to extract geomechanical parameters for subsequent modeling.

Results

The anisotropic rock mechanical parameters of shale were systematically obtained. Based on the rock mechanics experimental results and the anisotropic model, the depth-wise anisotropic stiffness matrix of the formation was derived from acoustic logging data, yielding anisotropic characterizations of mechanical parameters such as Young’s modulus, Poisson’s ratio, and compressive strength. Based on the acoustic-density log curves, the unloading characteristics of the study block were identified. Pore pressure was calculated using the Bowers unloading theory and calibrated with field Modular Formation Dynamics Tester data. By integrating a high-precision anisotropic rock mechanics model with pore pressure data, a higher-accuracy two-way horizontal principal stress field was derived using an anisotropic elastic model. This enabled the construction of a high-precision 1D anisotropic geomechanical model, which demonstrated significantly improved accuracy compared to the isotropic model.

Conclusions

This study established an anisotropic 1D geomechanical modeling workflow that provides a theoretical basis and technical support for reservoir stimulation and fracturing program design. The model's precision was improved by approximately 7% compared to the isotropic model. Validation against field data (e.g., well history records) revealed the distribution characteristics of anisotropic geomechanical parameters and in-situ stress along the wellbore. [Significance] The research findings serve as a foundational basis for geo-engineering integration, providing theoretical guidance and technical support for reservoir stimulation and hydraulic fracturing design.

shale oil reservoir  /  rock mechanics  /  geomechanics  /  anisotropic  /  1D geomechanical modeling
侯朔阳, 王小琼, 鲜成钢, 葛洪魁, 钟毅. 页岩油储层高精度一维地质力学建模研究. 地质力学学报, 2026 , 32 (2) : 469 -480 . DOI: 10.12090/j.issn.1006-6616.2025094
Shuoyang HOU, Xiaoqiong WANG, Chenggang XIAN, Hongkui GE, Yi ZHONG. Research on high-precision one-dimensional geomechanical modeling of shale oil reservoirs[J]. Journal of Geomechanics, 2026 , 32 (2) : 469 -480 . DOI: 10.12090/j.issn.1006-6616.2025094
  • This research was financially supported by the National Science and Technology Major Project for New Oil and Gas Exploration and Development (Grant No. 2025ZD1401403) and the General Program of the National Natural Science Foundation of China (Grant No. 42374132).
Year 2026 volume 32 Issue 2
31
13
Cite this Article
BibTeX
Article Info
doi: 10.12090/j.issn.1006-6616.2025094
  • Receive Date:2025-07-30
  • Online Date:2026-11-17
  • Published:2026-04-28
Article Data
Affiliations
History
  • Received:2025-07-30
  • Revised:2025-11-29
  • Accepted:2025-12-03
Funding
This research was financially supported by the National Science and Technology Major Project for New Oil and Gas Exploration and Development (Grant No. 2025ZD1401403) and the General Program of the National Natural Science Foundation of China (Grant No. 42374132).
Affiliations
    1State Key Laboratory of Petroleum Resources and Engineering, China University of Petroleum (Beijing), Beijing 102249, China
    2College of Petroleum Engineering, China University of Petroleum (Beijing), Beijing 102249, China
    3CNPC Engineering Technology R&D Company Limited, Beijing 102206, China
References
Share
https://castjournals.cast.org.cn/joweb/dzlxxb/EN/10.12090/j.issn.1006-6616.2025094
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT