收藏切换
A calculation method of the reservoir Biot coefficient based on the Griffith criterion and the equivalent inclusion theory
收藏切换
Hui ZHANG1, 2, Chenyang PEI3, Zhimin WANG1, 2, Lei LIU1, 2, Jing LI3, *, Yishuai LIU3, Zekun WU3
Journal of Geomechanics | 2026, 32(2) : 481 - 490
Less
收藏切换
Journal of Geomechanics | 2026, 32(2): 481-490
• Energy Resources Geology •
A calculation method of the reservoir Biot coefficient based on the Griffith criterion and the equivalent inclusion theory
Full
Hui ZHANG1, 2, Chenyang PEI3, Zhimin WANG1, 2, Lei LIU1, 2, Jing LI3, *, Yishuai LIU3, Zekun WU3
Affiliations
  • 1Tarim Oilfield Company, PetroChina, Korla 841000, Xinjiang, China
  • 2R&D Center for Ultra-Deep Complex Reservoir Exploration and Development, CNPC, Korla 841000, Xinjiang, China
  • 3State Key Laboratory of Deep Oil and Gas, China University of Petroleum (East China), Qingdao 266580, Shandong, China
Published: 2026-04-28 doi: 10.12090/j.issn.1006-6616.2025086
Outline
收藏切换
Objective

The Biot coefficient is defined as the ratio of the change in pore volume to the change in total rock volume, reflecting how efficiently pore pressure offsets externally the applied total stress under loading conditions. As a key parameter in poroelastic theory, the Biot coefficient links pore pressure to effective stress in a reservoir and plays a critical role in geostress calculation and wellbore stability analysis.

Methods

Based on the equivalent inclusion theory, this study introduces parameters such as the polarization factor and fracture aspect ratio to characterize the influence of fracture geometry on mechanical reservoir properties. [Results]Combined with the Griffith fracture criterion, a method for determining the expected aspect ratio of fractures is developed, leading to analytical expressions for the Biot coefficient in both fractured reservoirs and dissolution cavity reservoirs.

Conclusions

Compared with field-measured geostress data, the maximum and minimum horizontal principal stresses calculated using the proposed Biot coefficient method yield maximum errors of 5.75% and 6.03%, respectively, meeting engineering accuracy requirements.

Significance

These findings provide a theoretical basis for accurate geostress field characterization and efficient exploration and development of unconventional reservoirs.

Biot coefficient  /  Griffith criterion  /  equivalent inclusion theory  /  fractures  /  dissolution cavities  /  geostress
张辉, 裴晨阳, 王志民, 刘磊, 李静, 刘伊帅, 吴泽坤. 基于格里菲斯准则及等效夹杂理论的储层Biot系数计算方法. 地质力学学报, 2026 , 32 (2) : 481 -490 . DOI: 10.12090/j.issn.1006-6616.2025086
Hui ZHANG, Chenyang PEI, Zhimin WANG, Lei LIU, Jing LI, Yishuai LIU, Zekun WU. A calculation method of the reservoir Biot coefficient based on the Griffith criterion and the equivalent inclusion theory[J]. Journal of Geomechanics, 2026 , 32 (2) : 481 -490 . DOI: 10.12090/j.issn.1006-6616.2025086
  • This research was financially supported by the National Natural Science Foundation of China (Grant No. 42472195), the National Science and Technology Major Project (Grant No. 2025ZD1402400), and the CNPC Major Science and Technology Project (Grant No. 2023ZZ14YJ03).
Year 2026 volume 32 Issue 2
31
14
Cite this Article
BibTeX
Article Info
doi: 10.12090/j.issn.1006-6616.2025086
  • Receive Date:2025-07-09
  • Online Date:2026-11-17
  • Published:2026-04-28
Article Data
Affiliations
History
  • Received:2025-07-09
  • Revised:2026-02-04
  • Accepted:2026-02-05
Funding
This research was financially supported by the National Natural Science Foundation of China (Grant No. 42472195), the National Science and Technology Major Project (Grant No. 2025ZD1402400), and the CNPC Major Science and Technology Project (Grant No. 2023ZZ14YJ03).
Affiliations
    1Tarim Oilfield Company, PetroChina, Korla 841000, Xinjiang, China
    2R&D Center for Ultra-Deep Complex Reservoir Exploration and Development, CNPC, Korla 841000, Xinjiang, China
    3State Key Laboratory of Deep Oil and Gas, China University of Petroleum (East China), Qingdao 266580, Shandong, China
References
Share
https://castjournals.cast.org.cn/joweb/dzlxxb/EN/10.12090/j.issn.1006-6616.2025086
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT