收藏切换
Characteristics of current in-situ stress field and engineering zoning evaluation in complex structural areas: A case study of the Longmaxi shale reservoir in the southeastern margin of the Sichuan Basin
收藏切换
Shunting MA1, Ruixue LI1, 3, *, Xinhao CHEN2, Yifei DU1, Hucheng DENG1, 3, Jianhua HE1, 3, Hong YANG1, Limin WEI4
Journal of Geomechanics | 2026, 32(2) : 349 - 366
Less
收藏切换
Journal of Geomechanics | 2026, 32(2): 349-366
• Crustal Stress & Tectonic Stress Field •
Characteristics of current in-situ stress field and engineering zoning evaluation in complex structural areas: A case study of the Longmaxi shale reservoir in the southeastern margin of the Sichuan Basin
Full
Shunting MA1, Ruixue LI1, 3, *, Xinhao CHEN2, Yifei DU1, Hucheng DENG1, 3, Jianhua HE1, 3, Hong YANG1, Limin WEI4
Affiliations
  • 1College of Energy Resources (College of Modern Shale Gas Industry), Chengdu University of Technology, Chengdu 610059, Sichuan, China
  • 2Chongqing Drilling Branch, Southwest Petroleum Engineering Co., LTD., SINOPEC, Chongqing 400036, China
  • 3State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Chengdu 610059, Sichuan, China
  • 4Southwest Petroleum Branch, SINOPEC, Chengdu 610041, Sichuan, China
Published: 2026-04-28 doi: 10.12090/j.issn.1006-6616.2025057
Outline
收藏切换
Objective

The Dingshan–Dongxi area, located on the basin margin in southeastern Sichuan, lies at the junction of the eastern Sichuan fault–fold zone and the northern Guizhou fault–fold zone on the east side of the Luzhou–Chishui tectonic superposition zone. Due to multiple tectonic movements, the geological structure in this area is complex. The Longmaxi Formation in the study area is rich in shale gas resources, characterized by superior geological and reservoir conditions, and holds great potential for exploration and development. Clarifying the current in-situ stress state and its distribution is conducive to improving shale gas development efficiency. However, the complex in-situ stress field in this area leads to less accurate planar predictions and significant differences in the fracturing stimulation effects and production among horizontal wells.

Methods

This study provided a detailed interpretation of the in-situ stress direction in the well profile of the study area by integrating multi-source data, including core tests, well logging, and microseismic monitoring. Furthermore, the distribution characteristics of in-situ stress magnitudes among the well profile were clarified through hydraulic fracturing, acoustic emission experiments, and well logging. Refined geological modeling was performed on the structural deformation and fracture characteristics of the study area, and heterogeneous rock mechanical properties were assigned. Numerical simulation software was then applied to simulate the current in-situ stress distribution characteristics of the study area. Finally, based on the analysis of the influence of in-situ stress characteristics on fracturing stimulation effects, an in-situ stress zoning evaluation standard was constructed. Using the simulated in-situ stress field results, in-situ stress zoning was carried out in the Dingshan–Dongxi area, and the zoning results were verified through a retrospective evaluation of the fracturing effects of new wells.

Results

The results show that the current in-situ stress direction in the study area is mostly near east –west, with local deflections caused by fractures and structural deformations. The maximum horizontal principle stress, minimum horizontal principle stress, and vertical principal stress range from 58.4 to 167.0 MPa, 38.6 to 135.4 MPa, and 54.7 to 148.2 MPa, respectively, indicating a strike-slip stress state. The stress difference (maximum minus minimum horizontal principal stress) mainly ranges from 5 to 30 MPa. The magnitude of in-situ stress and the stress difference are generally controlled by burial depth. In areas with high structural deformation, both in-situ stress and stress difference are lower. Near faults, in-situ stress is lower, but the stress difference is higher. Zoning was performed using a minimum horizontal principal stress of 80 MPa and a stress difference of 20 MPa as thresholds. [Conclusions] It is recommended that areas with low stress difference and low in-situ stress be selected for fracturing stimulation. These areas are mainly located in the high-structural parts of the gentle slope area in the middle of Dingshan, the slope area of Dongxi, and the northern part of the Dongxi fault and anticline area.[Significance] This study advances the understanding of the current in-situ stress field of the Longmaxi Formation on the southeastern margin of the Sichuan Basin and has significant practical value for optimizing fracturing stimulation.

southeastern margin of the Sichuan Basin  /  first member of the Longmaxi Formation  /  shale  /  multi-source stress information  /  current in-situ stress field  /  in-situ stress zoning
马顺婷, 李瑞雪, 陈鑫豪, 杜奕霏, 邓虎成, 何建华, 杨鸿, 魏力民. 复杂构造区现今地应力场特征及工程分区评价——以川东南盆缘龙马溪组页岩储层为例. 地质力学学报, 2026 , 32 (2) : 349 -366 . DOI: 10.12090/j.issn.1006-6616.2025057
Shunting MA, Ruixue LI, Xinhao CHEN, Yifei DU, Hucheng DENG, Jianhua HE, Hong YANG, Limin WEI. Characteristics of current in-situ stress field and engineering zoning evaluation in complex structural areas: A case study of the Longmaxi shale reservoir in the southeastern margin of the Sichuan Basin[J]. Journal of Geomechanics, 2026 , 32 (2) : 349 -366 . DOI: 10.12090/j.issn.1006-6616.2025057
  • This research was financially supported by the Open Fund Project of the State Key Laboratory of Shale Oil and Gas Enrichment Mechanisms and Effective Development (Grant No. 33550000-24-ZC0699-0057).
Year 2026 volume 32 Issue 2
40
18
Cite this Article
BibTeX
Article Info
doi: 10.12090/j.issn.1006-6616.2025057
  • Receive Date:2025-07-08
  • Online Date:2026-11-17
  • Published:2026-04-28
Article Data
Affiliations
History
  • Received:2025-07-08
  • Revised:2025-09-07
  • Accepted:2025-09-10
Funding
This research was financially supported by the Open Fund Project of the State Key Laboratory of Shale Oil and Gas Enrichment Mechanisms and Effective Development (Grant No. 33550000-24-ZC0699-0057).
Affiliations
    1College of Energy Resources (College of Modern Shale Gas Industry), Chengdu University of Technology, Chengdu 610059, Sichuan, China
    2Chongqing Drilling Branch, Southwest Petroleum Engineering Co., LTD., SINOPEC, Chongqing 400036, China
    3State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Chengdu 610059, Sichuan, China
    4Southwest Petroleum Branch, SINOPEC, Chengdu 610041, Sichuan, China
References
Share
https://castjournals.cast.org.cn/joweb/dzlxxb/EN/10.12090/j.issn.1006-6616.2025057
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT