收藏切换
Mechanical properties of Carboniferous volcanic rock reservoirs and correction of dynamic and static parameters
收藏切换
Bei LYU1, Leiming CHENG1, Yufei ZHANG1, Yao LUO1, Mengjie LI2, Junwang FU2, Jinquan LI2, Shiyuan LI2, *
Journal of Geomechanics | 2025, 31(6) : 1296 - 1309
Less
收藏切换
Journal of Geomechanics | 2025, 31(6): 1296-1309
Mechanical properties of Carboniferous volcanic rock reservoirs and correction of dynamic and static parameters
Full
Bei LYU1, Leiming CHENG1, Yufei ZHANG1, Yao LUO1, Mengjie LI2, Junwang FU2, Jinquan LI2, Shiyuan LI2, *
Affiliations
  • 1China Petroleum Corporation New Oilfield Division (Oil Production Technology Research Institute), Karamay 834000, Xinjiang, China
  • 2College of Petroleum Engineering, China University of Petroleum (Beijing), Beijing 102249, China
Published: 2025-12-28 doi: 10.12090/j.issn.1006-6616.2025102
Outline
收藏切换
Objective

To address the challenges posed by the strong heterogeneity of the volcanic reservoirs of the Carboniferous C2 Formation in the Junggar Basin and the low accuracy of rock mechanical parameters derived from logging data, this study aims to precisely determine the relationship between dynamic and static mechanical parameters for typical lithologies to enhance the reliability of static parameter predictions.

Methods

Based on systematic laboratory testing of four representative lithologies (andesite, basalt, tuff, and volcanic breccia), lithology-specific dynamic-to-static conversion models were established and calibrated by introducing a confining pressure sensitivity parameter. An integrated microstructural analysis via thin-section and scanning electron microscope (SEM) observations was conducted.

Results

The research yielded clear quantitative relationships between the dynamic and static parameters for all four lithologies and confirmed the high accuracy of the newly established, confining-pressure-corrected conversion model.

Conclusion

The analysis further reveals an intrinsic link between the differences in macroscopic mechanical properties and dynamic-static parameter responses on the one hand and specific microstructural characteristics(including mineral composition, grain structure, and pore-fracture development) on the other. This link confirms the fundamental control that the rock microstructure has. The model developed and calibrated in this study effectively improves the accuracy of predicting static mechanical parameters, thereby providing critical technical and theoretical support for accurately obtaining these essential parameters from conventional logging data.

Significance

This model is of significant practical value for the efficient exploration and development of similar volcanic hydrocarbon reservoirs.

volcanic rock  /  Carboniferous System  /  dynamic and static parameters  /  rock mechanical properties  /  microscopic mechanism
吕蓓, 程垒明, 张雨菲, 罗垚, 李梦杰, 付俊望, 李金全, 李世远. 石炭系火山岩储层岩石力学特性及动、静态参数修正. 地质力学学报, 2025 , 31 (6) : 1296 -1309 . DOI: 10.12090/j.issn.1006-6616.2025102
Bei LYU, Leiming CHENG, Yufei ZHANG, Yao LUO, Mengjie LI, Junwang FU, Jinquan LI, Shiyuan LI. Mechanical properties of Carboniferous volcanic rock reservoirs and correction of dynamic and static parameters[J]. Journal of Geomechanics, 2025 , 31 (6) : 1296 -1309 . DOI: 10.12090/j.issn.1006-6616.2025102
  • This research is financially supported by the National Science and Technology Major Project (Grant No. 2025ZD1401404), the General Program of the National Natural Science Foundation of China (Grant No.52174011), and the Key Program of the National Natural Science Foundation of China (Grant No. 52434001).
Year 2025 volume 31 Issue 6
68
32
Cite this Article
BibTeX
Article Info
doi: 10.12090/j.issn.1006-6616.2025102
  • Receive Date:2025-08-01
  • Online Date:2026-11-13
  • Published:2025-12-28
Article Data
Affiliations
History
  • Received:2025-08-01
  • Revised:2025-12-01
  • Accepted:2025-12-05
Funding
This research is financially supported by the National Science and Technology Major Project (Grant No. 2025ZD1401404), the General Program of the National Natural Science Foundation of China (Grant No.52174011), and the Key Program of the National Natural Science Foundation of China (Grant No. 52434001).
Affiliations
    1China Petroleum Corporation New Oilfield Division (Oil Production Technology Research Institute), Karamay 834000, Xinjiang, China
    2College of Petroleum Engineering, China University of Petroleum (Beijing), Beijing 102249, China
References
Share
https://castjournals.cast.org.cn/joweb/dzlxxb/EN/10.12090/j.issn.1006-6616.2025102
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT