收藏切换
Determination of hydraulic fracture closure pressure based on total system stiffness method: Case studies
收藏切换
Yuehui YANG1, 2, Dongsheng SUN1, 2, *, Bangchen WU1, 2, Awei LI1, 2, Ran LI1, 2, Xianghui QIN1, 2, Weifeng SUN1, 2, Wen MENG1, 2, Qunce CHEN1, 2
Journal of Geomechanics | 2025, 31(6) : 1168 - 1176
Less
收藏切换
Journal of Geomechanics | 2025, 31(6): 1168-1176
Determination of hydraulic fracture closure pressure based on total system stiffness method: Case studies
Full
Yuehui YANG1, 2, Dongsheng SUN1, 2, *, Bangchen WU1, 2, Awei LI1, 2, Ran LI1, 2, Xianghui QIN1, 2, Weifeng SUN1, 2, Wen MENG1, 2, Qunce CHEN1, 2
Affiliations
  • 1Institute of Geomechanics, Chinese Academy of Geological Science, Beijing 100081, China
  • 2Technology Innovation Center for In-situ Stress, Ministry of Natural Resources, Beijing 100081, China
Published: 2025-12-28 doi: 10.12090/j.issn.1006-6616.2025099
Outline
收藏切换
Objective

Hydraulic fracturing is one of the most widely used and ISRM-recommended techniques for in-situ stress measurement in rock masses, where a key step is determining closure pressure from the pressure-decay curve as a proxy for the minimum horizontal principal stress. Conventional interpretation methods mainly rely on tangents or best-fit lines to analyze the pressure-decay rate, making the result highly sensitive to the selected time window and lacking clear physical representation of fracture closure, which introduces uncertainties in closure pressure and stress evaluation.

Methods

This study proposes a method based on the evolution of Total System Stiffness (TSS), in which the pressure-decay curve after shut-in is transformed into a TSS curve to better capture fracture-closure behavior, and the method is applied to hydraulic-fracturing datasets from different boreholes, lithologies and depths.

Results

The evolution of TSS after shut-in can be divided into three main stages whose features can be used to identify upper and lower bounds of closure pressure and to evaluate whether the pressure curve is suitable for in-situ stress interpretation; closure pressures obtained in this way show reduced sensitivity to the choice of time window compared with conventional approaches.

Conclusion

The TSS method provides clear physical meanings for the beginning and end of fracture closure and determines closure pressure directly from pressure data, without fitting or extrapolation. [Significance] The method offers a practical tool for improving closure-pressure interpretation and is expected to be widely applicable in hydraulic-fracturing-based in-situ stress analysis.

in-situ stress  /  hydraulic fracturing  /  pressure transient analysis  /  closure pressure  /  total system stiffness
杨跃辉, 孙东生, 吴邦宸, 李阿伟, 李冉, 秦向辉, 孙炜锋, 孟文, 陈群策. 总系统刚度法在水力裂缝闭合压力测定中的应用. 地质力学学报, 2025 , 31 (6) : 1168 -1176 . DOI: 10.12090/j.issn.1006-6616.2025099
Yuehui YANG, Dongsheng SUN, Bangchen WU, Awei LI, Ran LI, Xianghui QIN, Weifeng SUN, Wen MENG, Qunce CHEN. Determination of hydraulic fracture closure pressure based on total system stiffness method: Case studies[J]. Journal of Geomechanics, 2025 , 31 (6) : 1168 -1176 . DOI: 10.12090/j.issn.1006-6616.2025099
  • This research is financially supported by the Deep Earth Probe and Mineral Resources Exploration−National Science and Technology Major Project (Grant No. 2024ZD1000701), the General Program of the National Natural Science Foundation of China (Grant No. 42174122), the Fundamental Research Fund of the Institute of Geomechanics, Chinese Academy of Geological Sciences(Grant No. DZLXJK202407), and the Geological Survey Project of the China Geological Survey (Grant No. DD20230100401).
Year 2025 volume 31 Issue 6
70
34
Cite this Article
BibTeX
Article Info
doi: 10.12090/j.issn.1006-6616.2025099
  • Receive Date:2025-07-31
  • Online Date:2026-11-13
  • Published:2025-12-28
Article Data
Affiliations
History
  • Received:2025-07-31
  • Revised:2025-09-18
  • Accepted:2025-10-11
Funding
This research is financially supported by the Deep Earth Probe and Mineral Resources Exploration−National Science and Technology Major Project (Grant No. 2024ZD1000701), the General Program of the National Natural Science Foundation of China (Grant No. 42174122), the Fundamental Research Fund of the Institute of Geomechanics, Chinese Academy of Geological Sciences(Grant No. DZLXJK202407), and the Geological Survey Project of the China Geological Survey (Grant No. DD20230100401).
Affiliations
    1Institute of Geomechanics, Chinese Academy of Geological Science, Beijing 100081, China
    2Technology Innovation Center for In-situ Stress, Ministry of Natural Resources, Beijing 100081, China
References
Share
https://castjournals.cast.org.cn/joweb/dzlxxb/EN/10.12090/j.issn.1006-6616.2025099
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT