收藏切换
Insights into the statistical relationship between focal mechanisms and stress from synthetic experiments
收藏切换
Zhenyue LI1, Yongge WAN1, 2, *
Journal of Geomechanics | 2025, 31(6) : 1159 - 1167
Less
收藏切换
Journal of Geomechanics | 2025, 31(6): 1159-1167
Insights into the statistical relationship between focal mechanisms and stress from synthetic experiments
Full
Zhenyue LI1, Yongge WAN1, 2, *
Affiliations
  • 1Institute of Disaster Prevention, Sanhe 065201, Hebei, China
  • 2Hebei Key Laboratory of Earthquake Dynamics, Sanhe 065201, Heibei, China
Published: 2025-12-28 doi: 10.12090/j.issn.1006-6616.2025082
Outline
收藏切换
Objective

The extent to which the spatial distribution patterns (particularly the clustering characteristics) of fault nodal planes or the P, B, and T axes of a set of focal mechanism data can provide information about background stress causing earthquakes has long been a controversial academic topic.

Methods

This study systematically investigates this issue through synthetic experiments designed on the basis of the stress–fault slip relationship, with stress parameters including the orientations of the three principal stresses and the stress shape ratio (R).

Results

The experimental results demonstrate that the spatial distribution patterns of both fault nodal planes and PBT axes are jointly controlled by the stress shape ratio and the fault failure conditions. In most cases, the two nodal planes exhibit widely scattered spatial distributions. Only when the shape ratio is close to 0.5 and the contact area between the Mohr-Coulomb failure envelope and Mohr’s circle is minimized do the distributions of both the actual and the auxiliary planes become relatively concentrated. Under these specific conditions, the fault nodal planes (their normals) gain statistical significance for estimating stress orientations. Identifying the actual fault plane among the two nodal planes in focal mechanisms would enhance the determination of principal stress directions. Notably, the spatial distribution of PBT axes effectively captures both the principal stress orientations and the shape ratio. Key findings include: (1) Due to the influence of fault failure conditions and the shape ratio, the P, B, and T axes may not cluster or disperse simultaneously. However, when clustering occurs, they converge near the $ {\sigma }_{1} $, $ {\sigma }_{2} $, or $ {\sigma }_{3} $ axes, respectively. (2) A ring-shaped (toroidal) distribution of T axes indicates a high R-value. (3) P and T axes never exhibit fully random scattering; if such disorder is observed in real data, it suggests that the focal mechanisms may not share a common stress regime.

Conclusion

This study provides critical constraints for evaluating whether focal mechanism data used in stress inversion belong to a unified stress regime and for predicting stress parameters from the distribution of PBT axes. [Significance] These results offer significant implications for developing and applying stress inversion methodology using focal mechanisms.

focal mechanism  /  fault nodal planes  /  PBT axes  /  stress tensor
李振月, 万永革. 合成实验揭示的震源机制与应力信息的统计关系. 地质力学学报, 2025 , 31 (6) : 1159 -1167 . DOI: 10.12090/j.issn.1006-6616.2025082
Zhenyue LI, Yongge WAN. Insights into the statistical relationship between focal mechanisms and stress from synthetic experiments[J]. Journal of Geomechanics, 2025 , 31 (6) : 1159 -1167 . DOI: 10.12090/j.issn.1006-6616.2025082
  • This research was financially supported by the National Natural Science Foundation of China (Grant No. 42174074).
Year 2025 volume 31 Issue 6
68
31
Cite this Article
BibTeX
Article Info
doi: 10.12090/j.issn.1006-6616.2025082
  • Receive Date:2025-07-08
  • Online Date:2026-11-13
  • Published:2025-12-28
Article Data
Affiliations
History
  • Received:2025-07-08
  • Revised:2025-09-28
  • Accepted:2025-09-30
Funding
This research was financially supported by the National Natural Science Foundation of China (Grant No. 42174074).
Affiliations
    1Institute of Disaster Prevention, Sanhe 065201, Hebei, China
    2Hebei Key Laboratory of Earthquake Dynamics, Sanhe 065201, Heibei, China
References
Share
https://castjournals.cast.org.cn/joweb/dzlxxb/EN/10.12090/j.issn.1006-6616.2025082
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT