收藏切换
Crustal anatexis and ductile superimposition in the Culai Mountain region, western Shandong Province: Constraints on the Neoarchean tectonic framework of the eastern North China Craton
收藏切换
Qiaoting TANG1, Jian ZHANG2, *, Shuhui ZHANG1, Changqing YIN1, Qihang WU2, Chen ZHAO3, Mingtao HE1, Wei HUANG2
Journal of Geomechanics | 2025, 31(4) : 638 - 656
Less
收藏切换
Journal of Geomechanics | 2025, 31(4): 638-656
• Tectonic System & Structural Geology •
Crustal anatexis and ductile superimposition in the Culai Mountain region, western Shandong Province: Constraints on the Neoarchean tectonic framework of the eastern North China Craton
Full
Qiaoting TANG1, Jian ZHANG2, *, Shuhui ZHANG1, Changqing YIN1, Qihang WU2, Chen ZHAO3, Mingtao HE1, Wei HUANG2
Affiliations
  • 1School of Earth Sciences and Engineering, Sun Yat-sen University, Zhuhai 519082, Guangdong, China
  • 2Department of Earth and Planetary Sciences, The University of Hong Kong, Hong Kong 999077, China
  • 3Shenyang Center of Geological Survey, China Geological Survey, Shenyang 110034, Liaoning, China
Published: 2025-08-28 doi: 10.12090/j.issn.1006-6616.2025043
Outline
收藏切换
Objective

Western Shandong is located in the core area of the eastern North China Craton and represents a typical Archean basement exposure. It extends as an overall NW–SE trending linear belt. This area preserves not only multiple phases of magmatic records spanning the early to late Neoarchean but also abundant anatectic–rheological structures overprinted by ductile deformation fabrics. These features are of great significance for understanding the Neoarchean tectonic evolution of the North China Craton. The Culai Mountain region is one of the most promising areas for such geological studies. Situated in the core of the tectonic belt (Belt B) of western Shandong, it is characterized by well-developed anatexis and ductile deformation. This makes it an ideal location for investigating the spatial and temporal relationships between crustal anatexis and ductile deformation.

Methods

In this study, we selected a representative migmatite outcrop at the Huangshiya Village and conducted systematic field structural analyses, petrographic observations, and LA–ICP–MS zircon U–Pb geochronology.

Results

Field observations show that the structural lineaments in this region exhibit an overall NW–SE orientation. Numerous felsic melts developed within the amphibolites, mainly as bands along the foliation, with a few occurring in a network-like or disseminated pattern. Flow folds are well-developed. Petrographic observations demonstrate that quartz grains are distributed along the irregular, corroded boundaries of K-feldspar and plagioclase, containing small melt pockets, bead-like quartzs, and melt films. These features collectively indicate intense anatexis in the region. The newly generated melts reduced the overall rock strength, making it more susceptible to subsequent ductile deformation. Concurrently, NE–SW-oriented horizontal compressive stress further promoted NW–SE regional extension, consistent with the nearly vertical foliation and sub-horizontal mineral stretching lineations observed in the amphibolite. This suggests a deformation regime dominated by near-oblate strain. To constrain the timing of the regional deformation, we conducted LA-ICP-MS zircon U-Pb dating on representative pre-, syn-, and post-tectonic samples of the area. The results indicate that the residual amphibolite records a melt crystallization age of ~2503 Ma, representing the timing of the regional anatexis event. The syn-tectonic monzogranite yields a crystallization age of ~2497 Ma, reflecting a syn-tectonic magmatic event, while the undeformed pegmatite veins formed at ~2465 Ma, bracketing the regional ductile deformation at 2497-2465 Ma.

Conclusion

In summary, the western Shandong region experienced intense anatexis in the late Neoarchean, which was rapidly overprinted by near-oblate strain-dominated shortening deformation under NE–SW-oriented horizontal compressive stress. The anatexis further facilitated the development of NW–SE-directed ductile deformation. The superimposition of these two events ultimately shaped the structural pattern of the Neoarchean crust of the western Shandong region. [Significance] This study provides new constraints that improve the understanding of the Neoarchean tectonic framework and structural patterns of the western Shandong region.

North China Craton  /  western Shandong  /  Culai Mountain  /  Late Neoarchean  /  anatexis  /  ductile deformation
唐巧婷, 张健, 张书慧, 尹常青, 吴启航, 赵辰, 何明涛, 黄葳. 鲁西徂徕山地区地壳深熔−韧性变形叠加:对华北克拉通东部新太古代构造样式的约束. 地质力学学报, 2025 , 31 (4) : 638 -656 . DOI: 10.12090/j.issn.1006-6616.2025043
Qiaoting TANG, Jian ZHANG, Shuhui ZHANG, Changqing YIN, Qihang WU, Chen ZHAO, Mingtao HE, Wei HUANG. Crustal anatexis and ductile superimposition in the Culai Mountain region, western Shandong Province: Constraints on the Neoarchean tectonic framework of the eastern North China Craton[J]. Journal of Geomechanics, 2025 , 31 (4) : 638 -656 . DOI: 10.12090/j.issn.1006-6616.2025043
  • This research is financially supported by the National Natural Science Foundation of China (Grant Nos. 42025204 and 42302221).
Year 2025 volume 31 Issue 4
53
25
Cite this Article
BibTeX
Article Info
doi: 10.12090/j.issn.1006-6616.2025043
  • Receive Date:2025-04-23
  • Online Date:2026-11-13
  • Published:2025-08-28
Article Data
Affiliations
History
  • Received:2025-04-23
  • Revised:2025-05-28
  • Accepted:2025-05-28
Funding
This research is financially supported by the National Natural Science Foundation of China (Grant Nos. 42025204 and 42302221).
Affiliations
    1School of Earth Sciences and Engineering, Sun Yat-sen University, Zhuhai 519082, Guangdong, China
    2Department of Earth and Planetary Sciences, The University of Hong Kong, Hong Kong 999077, China
    3Shenyang Center of Geological Survey, China Geological Survey, Shenyang 110034, Liaoning, China
References
Share
https://castjournals.cast.org.cn/joweb/dzlxxb/EN/10.12090/j.issn.1006-6616.2025043
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT