收藏切换
Avoidance distance and influence range of active faults: A case study of Litang fault
收藏切换
Zhen YANG1, 2, Ning ZHONG1, 3, *, Xianbing ZHANG1, 2, Hao YU1, 2, Changbao GUO1, 3, Haibing LI4
Journal of Geomechanics | 2025, 31(1) : 124 - 138
Less
收藏切换
Journal of Geomechanics | 2025, 31(1): 124-138
• Active Tectonics & Earthquake •
Avoidance distance and influence range of active faults: A case study of Litang fault
Full
Zhen YANG1, 2, Ning ZHONG1, 3, *, Xianbing ZHANG1, 2, Hao YU1, 2, Changbao GUO1, 3, Haibing LI4
Affiliations
  • 1Institute of Geomechanics, Chinese Academy of Geological Sciences, Beijing 100081, China
  • 2School of Earth Sciences and Resources, China University of Geosciences, Beijing 100083, China
  • 3Research Center of Neotectonism and Crustal Stability, China Geological Survey, Beijing 100081, China
  • 4Institute of Geology, Chinese Academy of Geological Sciences, Beijing 100037, China
Published: 2025-02-28 doi: 10.12090/j.issn.1006-6616.2023085
Outline
收藏切换
Objective

Active faults can not only trigger strong earthquakes, but also cause engineering breaks, creep deformation, and geological disasters, which seriously threaten the planning, construction, and safe operation of major projects.

Methods

In this study, based on the statistics of coseismic surface ruptures, the avoidance distances of faults with different properties and the ranges of extremely strong, strong, less strong, and moderately affected areas of active fault zones are established. Remote sensing, a geological survey, dislocation landforms, and shallow seismic exploration were used to analyze, the avoidance distance and affected area of the Litang fault on the Qinghai-Tibet Plateau.

Conclusion

This study concludes that the hanging wall and footwall avoidance distances of normal faults are not less than 30 m and 15 m, respectively; the hanging wall and footwall avoidance distances of thrust faults are not less than 45 m and 15 m, respectively; the avoidance distance of strike-slip faults is not less than 30 m. The Litang fault is mainly characterized by strike-slip with normal fault components, and its hanging-wall avoidance distance is 30 m and its footwall avoidance distance is 15 m. The extremely strong, strongly, less strong, and moderately affected areas of the Litang fault zones are 154 m, 154-500 m, 500-1000 m, and 1000-3000 m, respectively. [Significance] The research provides basic data for the planning and construction of major projects and the spatial control of the national land.

active faults  /  avoidance distances  /  influence range  /  Litang fault  /  Qinghai-Tibet Plateau
杨镇, 钟宁, 张献兵, 于皓, 郭长宝, 李海兵. 活动断层的避让距离与影响范围−以理塘断裂为例. 地质力学学报, 2025 , 31 (1) : 124 -138 . DOI: 10.12090/j.issn.1006-6616.2023085
Zhen YANG, Ning ZHONG, Xianbing ZHANG, Hao YU, Changbao GUO, Haibing LI. Avoidance distance and influence range of active faults: A case study of Litang fault[J]. Journal of Geomechanics, 2025 , 31 (1) : 124 -138 . DOI: 10.12090/j.issn.1006-6616.2023085
  • This research is financially supported by National Natural Science Foundation of China (Grant No. 42177184); Project of China Geological Survey (Grant No. DD20221816) and Chinese Postdoctoral Science Foundation (Grant No. 2019M650788).
Year 2025 volume 31 Issue 1
59
29
Cite this Article
BibTeX
Article Info
doi: 10.12090/j.issn.1006-6616.2023085
  • Receive Date:2023-05-29
  • Online Date:2026-11-13
  • Published:2025-02-28
Article Data
Affiliations
History
  • Received:2023-05-29
  • Revised:2024-11-05
  • Accepted:2024-11-12
Funding
This research is financially supported by National Natural Science Foundation of China (Grant No. 42177184); Project of China Geological Survey (Grant No. DD20221816) and Chinese Postdoctoral Science Foundation (Grant No. 2019M650788).
Affiliations
    1Institute of Geomechanics, Chinese Academy of Geological Sciences, Beijing 100081, China
    2School of Earth Sciences and Resources, China University of Geosciences, Beijing 100083, China
    3Research Center of Neotectonism and Crustal Stability, China Geological Survey, Beijing 100081, China
    4Institute of Geology, Chinese Academy of Geological Sciences, Beijing 100037, China
References
Share
https://castjournals.cast.org.cn/joweb/dzlxxb/EN/10.12090/j.issn.1006-6616.2023085
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT