收藏切换
Mechanics and analog modeling of the Huo-Ma-Tu thrust sheet in the southern Junggar Basin fold and thrust belt
收藏切换
Geng YANG, Zhuxin CHEN, Xuesong LU, Yuqing ZHANG
Journal of Geomechanics | 2025, 31(1) : 8 - 23
Less
收藏切换
Journal of Geomechanics | 2025, 31(1): 8-23
• Special Section Dedicated to the 30th Anniversary •
Mechanics and analog modeling of the Huo-Ma-Tu thrust sheet in the southern Junggar Basin fold and thrust belt
Full
Geng YANG, Zhuxin CHEN, Xuesong LU, Yuqing ZHANG
Affiliations
  • Research Institute of Petroleum Exploration and Development, Beijing 100083, China
Published: 2025-02-28 doi: 10.12090/j.issn.1006-6616.2023074
Outline
收藏切换
Objective

Understanding the mechanical development of thrust sheets is fundamental, yet challenging, to comprehensively understand the deformation processes of thrust belts. Various models explain the mechanics behind thrust sheet development, yet significant controversies persist.

Methods

This study takes a comprehensive approach, focusing on the southern Junggar Thrust Belt. We combine a variety of methods including surface geological surveys, seismic reflection profiles, and drilling data analysis with mechanical and physical modeling to thoroughly investigate this issue.

Results

(1) Based on surface geological surveys, seismic data interpretation, and drilling data, we confirm that thrust faults have developed in the core and southern limb of the Huo-Ma-Tu anticline. These faults extend southward beneath the front of anticlines, forming the extensively distributed Huo-Ma-Tu thrust sheet, which exhibits none to weak internal structural deformation. (2) Drilling data from the Huo-Ma-Tu structural belt clearly show that the frontal thrust faults and detachment faults have developed in layers with abnormally high fluid pressure, indicating that the thrust sheet is a combination of strong deformation sheets and weak detachment faults. Analysis of in-situ formation pressure data suggests that the thrust faults within these overpressure layers can segregate fluid pressure coefficients between the hanging wall and the footwall. (3) Using the geometric deformation characteristics of the Huo-Ma-Tu thrust sheet obtained from seismic profiles and drilling data, a simplified mechanical model is established. This model calculates the mathematical relationship between the horizontal compressive stress-to-gravity ratio at the back of the thrust sheet, the geometric parameters of the thrust sheet, the fault friction coefficient, and the fault dip angle. Separate equations are provided for thrust sheets without fluid overpressure and those with fluid overpressure detachment layers. (4) A physical model of the development characteristics of the Huo-Ma-Tu thrust sheet in the Southern Junggar Thrust Belt confirms that the deformation pattern of such rigid thrust sheets aligns with the structural interpretation from seismic profiles. This supports the validity of the simplified mechanical model in reflecting the actual geological conditions.

Conclusions

The simplified mechanical model demonstrates that the required horizontal tectonic stress-to-gravity ratio at the back of the thrust sheet decreases significantly with increasing fluid pressure coefficient. The physical modeling results also verify that the deformation pattern of strong deformation sheets/weak detachment fault thrust sheets generally conform to the structural interpretations of the seismic profiles. The experiments reveal that the large displacements at the base of the thrust sheet result from the accumulation of small-scale displacements coinciding across multiple segments.

Significance

This study proposes simplified rectangular with triangular geometric models of thrust sheets, which can preliminarily explain the kinematics and dynamics of thrust sheets, especially those with fluid overpressure. The derived mathematical relationships accurately describe the geometric, kinematic, and dynamic relationships of thrust sheets and are robustly validated by physical simulation experiments, reinforcing the reliability of our findings.

southern Junggar Basin fold and thrust belt  /  Huo-Ma-Tu thrust sheet  /  tectonic overpressure  /  mechanical model  /  analog modeling
杨庚, 陈竹新, 鲁雪松, 张欲清. 准南逆冲褶皱带霍−玛−吐逆冲岩席发育力学机制与模拟实验. 地质力学学报, 2025 , 31 (1) : 8 -23 . DOI: 10.12090/j.issn.1006-6616.2023074
Geng YANG, Zhuxin CHEN, Xuesong LU, Yuqing ZHANG. Mechanics and analog modeling of the Huo-Ma-Tu thrust sheet in the southern Junggar Basin fold and thrust belt[J]. Journal of Geomechanics, 2025 , 31 (1) : 8 -23 . DOI: 10.12090/j.issn.1006-6616.2023074
  • This research is financially supported by PetroChina Science and Technology Project (Grants No. 2023ZZ0202 and 2023YQX10101).
Year 2025 volume 31 Issue 1
57
29
Cite this Article
BibTeX
Article Info
doi: 10.12090/j.issn.1006-6616.2023074
  • Receive Date:2023-05-15
  • Online Date:2026-11-13
  • Published:2025-02-28
Article Data
Affiliations
History
  • Received:2023-05-15
  • Revised:2024-07-26
  • Accepted:2024-08-15
Funding
This research is financially supported by PetroChina Science and Technology Project (Grants No. 2023ZZ0202 and 2023YQX10101).
Affiliations
    Research Institute of Petroleum Exploration and Development, Beijing 100083, China
References
Share
https://castjournals.cast.org.cn/joweb/dzlxxb/EN/10.12090/j.issn.1006-6616.2023074
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT