收藏切换
Permian–Triassic reservoir characteristics and controls on their differences in the Pen-1 West Sag, Junggar Basin
收藏切换
Fushun ZHANG
Journal of Geomechanics | 2026, 32(4) : 861 - 876
Less
收藏切换
Journal of Geomechanics | 2026, 32(4): 861-876
• Energy Resources Geology •
Permian–Triassic reservoir characteristics and controls on their differences in the Pen-1 West Sag, Junggar Basin
Full
Fushun ZHANG
Affiliations
  • Sinopec Petroleum Exploration and Production Research Institute, Beijing 102206, China
Published: 2026-08-28 doi: 10.12090/j.issn.1006-6616.2026027
Outline
收藏切换
Objective

The Pen-1 West Sag is an important area for future hydrocarbon exploration in the hinterland of the Junggar Basin. However, systematic studies on the characteristics and development mechanisms of its deep to ultra-deep Permian–Triassic reservoirs remain limited.

Methods

Core, well-log, analytical, and seismic data were integrated to systematically investigate the petrological characteristics, reservoir properties, pore structures, and diagenetic evolution of the Permian–Triassic reservoirs in the Pen-1 West Sag and to identify the main factors controlling differences in reservoir quality.

Results

The reservoirs are predominantly lithic sandstones, with volcanic lithic fragments accounting for more than 80% on average; intermediate to mafic volcanic rock fragments dominate. Reservoir properties show significant vertical variations. The Karamay and Baikouquan Formations exhibit the best reservoir properties, with porosities mainly ranging from 5% to 13% and permeabilities mostly in the range of 0.1×10−3–10.0×10−3 mD, indicating relatively high-quality reservoirs. In contrast, the Upper and Lower Urho Formations have poorer reservoir properties. Secondary pores dominate the reservoir pore system, with dissolution pores within zeolite cements and intragranular dissolution pores within volcanic lithic fragments being the most abundant secondary pore types. Secondary pores account for more than 70% of the total pore space in the Baikouquan and Upper Urho Formations, whereas they account for 40%–60% in the Karamay Formation, where residual primary intergranular pores remain important.

Conclusions

Reservoir property differences are jointly controlled by multiple factors, including provenance characteristics, lithology and grain size, diagenetic alteration (grain-coating development, zeolite cementation and dissolution, and clay-mineral filling), the composition of volcanic lithic fragments, and temperature and pressure conditions. Based on the diagenetic evolution sequence and variations in the proportions of pore types, two reservoir property evolution models are proposed: a primary-pore-preservation type, represented by the Karamay Formation, and a secondary-pore-dominated type, represented by the Baikouquan and Upper Urho Formations.

Significance

These findings provide an important basis for predicting and evaluating deep clastic reservoirs in the Pen-1 West Sag and in other areas with similar geological conditions.

Junggar Basin  /  Pen-1 West Sag  /  Permian–Triassic  /  reservoir characteristics  /  reservoir property differences  /  controlling mechanisms  /  diagenetic evolution
张福顺. 准噶尔盆地盆1井西凹陷二叠系—三叠系储层特征及差异成因. 地质力学学报, 2026 , 32 (4) : 861 -876 . DOI: 10.12090/j.issn.1006-6616.2026027
Fushun ZHANG. Permian–Triassic reservoir characteristics and controls on their differences in the Pen-1 West Sag, Junggar Basin[J]. Journal of Geomechanics, 2026 , 32 (4) : 861 -876 . DOI: 10.12090/j.issn.1006-6616.2026027
Year 2026 volume 32 Issue 4
210
86
Cite this Article
BibTeX
Article Info
doi: 10.12090/j.issn.1006-6616.2026027
  • Receive Date:2026-02-24
  • Online Date:2026-09-30
  • Published:2026-08-28
Article Data
Affiliations
History
  • Received:2026-02-24
  • Revised:2026-06-10
  • Accepted:2026-06-10
Affiliations
    Sinopec Petroleum Exploration and Production Research Institute, Beijing 102206, China
References
Share
https://castjournals.cast.org.cn/joweb/dzlxxb/EN/10.12090/j.issn.1006-6616.2026027
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT