We analyzed and evaluated the in-situ stress distribution characteristics and fault stability in the project area of a large hydropower station on the northern margin of the eastern Himalayan syntaxis.
We combined hydraulic fracturing measurements with three-dimensional stress field inversion analysis to obtain stress field information for key structures, such as the underground powerhouse and water diversion tunnels.
The study revealed the following: (1) The principal stress relationship generally follows SH>Sv>Sh, dominated by horizontal stress, indicating a strike-slip stress regime. The predominant orientation of the maximum horizontal principal stress is ENE, consistent with the principal compressive stress direction derived from focal mechanism solutions. This is inferred to be primarily controlled by the NE-directed compression of the Indian Plate against the Eurasian Plate and the clockwise rotation around the eastern Himalayan syntaxis. (2) The principal stresses increase linearly with depth. Within the depth range of 77.8 m to 386.4 m, SH and Sh range from 3.0 MPa to 11.0 MPa and 2.0 MPa to 6.7 MPa, with gradients of 1.82 MPa/100 m and 0.72 MPa/100 m, respectively. Compared to the Tibetan Plateau block, the stress magnitude in the study area is relatively low. This is due to the Jiali Fault, which is predominantly characterized by strike-slip motion, accommodating and partially releasing tectonic stress. (3) Risk analysis of active faults based on the Mohr-Coulomb criterion and Byerlee’s law shows that the stress state of the Jiali Fault in the project area has not reached the critical condition for shallow crustal fault slip instability, indicating relative stability. (4) Stress field inversion results reveal that along the water diversion tunnels and the underground powerhouse (burial depth 160 m to 400 m), the maximum horizontal principal stress ranges from 3.9 MPa to 11.0 MPa, the vertical stress from 5.8 MPa to 10.7 MPa, and the minimum horizontal principal stress from 4.5 MPa to 7.8 MPa. The azimuth of the maximum horizontal principal stress is between 48° and 66°. The orientation of the maximum horizontal principal stress in the rock surrounding the tunnel often intersects the tunnel axis at large angles (generally 62° to 70°), which is unfavorable for the stability of the rock surrounding the tunnel.
A combined analysis of in-situ stress and surrounding rock strength indicates the possibility of slight rockbursts. Necessary protective measures should be implemented during excavation based on actual site conditions.
This study provides key evidence for evaluating fault stability and engineering safety in the project area.
| 科 Family | 属数 Number of genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) | 属 Genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) |
|---|---|---|---|---|---|---|
| 鹅膏菌科Amanitaceae | 2 | 11 | 5.26 | 鹅膏菌属 Amanita | 10 | 4.78 |
| 小菇科 Mycenaceae | 2 | 12 | 5.74 | 丝盖伞属 Inocybe | 5 | 2.39 |
| 多孔菌科 Polyporaceae | 8 | 14 | 6.70 | 蜡蘑属 Laccaria | 5 | 2.39 |
| 红菇科 Russulaceae | 3 | 23 | 11.00 | 小皮伞属 Marasmius | 6 | 2.87 |
| 小菇属 Mycena | 11 | 5.26 | ||||
| 光柄菇属 Pluteus | 5 | 2.39 | ||||
| 红菇属 Russula | 17 | 8.13 | ||||
| 栓菌属 Trametes | 5 | 2.39 |