收藏切换
Research on the application of the Quantum-behaved Particle Swarm Optimization algorithm in the inverse estimation of in-situ stress based on fault-slip fractures
收藏切换
Weiwei ZHOU1, Yongcun FENG2, *, Xiaorong LI2, Jie LIU1, Feiyu SU1, Han HU1
Journal of Geomechanics | 2025, 31(6) : 1238 - 1254
Less
收藏切换
Journal of Geomechanics | 2025, 31(6): 1238-1254
Research on the application of the Quantum-behaved Particle Swarm Optimization algorithm in the inverse estimation of in-situ stress based on fault-slip fractures
Full
Weiwei ZHOU1, Yongcun FENG2, *, Xiaorong LI2, Jie LIU1, Feiyu SU1, Han HU1
Affiliations
  • 1College of Petroleum Engineering, China University of Petroleum (Beijing), Beijing 102249, China
  • 2College of Safety and Ocean Engineering, China University of Petroleum (Beijing), Beijing 102249, China
Published: 2025-12-28 doi: 10.12090/j.issn.1006-6616.2025095
Outline
收藏切换
Objective

To improve the computational efficiency and accuracy of stress tensor inversion from fault-slip data, and to address the limitations of conventional grid search methods—namely, high computational cost and susceptibility to local optima—an inversion approach based on intelligent optimization algorithms was investigated.

Methods

A novel fault-slip data inversion method based on the Quantum-behaved Particle Swarm Optimization (QPSO) algorithm is proposed, in which the stress tensor is parameterized by four variables: three Euler angles (α, β, γ) representing the orientations of the principal stress axes and a stress ratio (Φ). A misfit function is constructed based on the angular deviation between the shear stress direction and the observed slip vector. To enhance convergence performance, an elite-guided learning strategy was adopted, incorporating a reward-penalty feedback mechanism and a tensor distance metric to quantify stress similarity. Multiple synthetic stress models were tested using a simulated fault-slip dataset, and the inversion performance of QPSO was compared with the conventional grid search method in terms of efficiency and accuracy.

Results

The proposed QPSO-based inversion method achieves a non-convergence rate below 8% and reduces computational time to approximately 1/27 of what is required by the grid search approach. The method converges rapidly in high-dimensional, multimodal parameter spaces and accurately identifies normal, reverse, and strike-slip stress regimes. The well-defined clustering of the inversion results indicates strong stability and physical consistency.

Conclusion

The QPSO-based method exhibits significant advantages in stress tensor inversion from fault-slip data, including high computational efficiency, strong adaptability, and fast convergence.

Significance

It provides effective technical support for regional in-situ stress field reconstruction and focal mechanism analysis, and offers the enlightenment and reference value of theoretical methods in geomechanical applications.

stress tensor inversion  /  fault-slip data  /  in-situ stress  /  QPSO inversion method  /  tensor distance
周围维, 冯永存, 李晓蓉, 刘捷, 苏飞宇, 胡晗. 量子群优化算法在断层滑动擦痕反演地应力中的应用研究. 地质力学学报, 2025 , 31 (6) : 1238 -1254 . DOI: 10.12090/j.issn.1006-6616.2025095
Weiwei ZHOU, Yongcun FENG, Xiaorong LI, Jie LIU, Feiyu SU, Han HU. Research on the application of the Quantum-behaved Particle Swarm Optimization algorithm in the inverse estimation of in-situ stress based on fault-slip fractures[J]. Journal of Geomechanics, 2025 , 31 (6) : 1238 -1254 . DOI: 10.12090/j.issn.1006-6616.2025095
  • This research is financially supported by the National Science and Technology Major Project (Grant No. 2025ZD1011100).
Year 2025 volume 31 Issue 6
64
28
Cite this Article
BibTeX
Article Info
doi: 10.12090/j.issn.1006-6616.2025095
  • Receive Date:2025-07-30
  • Online Date:2026-11-13
  • Published:2025-12-28
Article Data
Affiliations
History
  • Received:2025-07-30
  • Revised:2025-10-09
  • Accepted:2025-10-27
Funding
This research is financially supported by the National Science and Technology Major Project (Grant No. 2025ZD1011100).
Affiliations
    1College of Petroleum Engineering, China University of Petroleum (Beijing), Beijing 102249, China
    2College of Safety and Ocean Engineering, China University of Petroleum (Beijing), Beijing 102249, China
References
Share
https://castjournals.cast.org.cn/joweb/dzlxxb/EN/10.12090/j.issn.1006-6616.2025095
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT