The sweet spot intervals of shale oil reservoirs exhibit rapid vertical variations, centimeter-scale thin interbeds, well-developed bedding planes and strong anisotropy. Therefore, traditional isotropic models are inadequate for detailed geomechanical modeling and characterization, posing significant challenges for reservoir stimulation and hydraulic fracturing design.
Geomechanics is key to the cost-effective development of oil and gas reservoirs with complex geological features. To establish a high-precision 1D geomechanical model, anisotropy experiments were conducted on shale oil reservoirs in the laboratory, and well log data were then used to extract geomechanical parameters for subsequent modeling.
The anisotropic rock mechanical parameters of shale were systematically obtained. Based on the rock mechanics experimental results and the anisotropic model, the depth-wise anisotropic stiffness matrix of the formation was derived from acoustic logging data, yielding anisotropic characterizations of mechanical parameters such as Young’s modulus, Poisson’s ratio, and compressive strength. Based on the acoustic-density log curves, the unloading characteristics of the study block were identified. Pore pressure was calculated using the Bowers unloading theory and calibrated with field Modular Formation Dynamics Tester data. By integrating a high-precision anisotropic rock mechanics model with pore pressure data, a higher-accuracy two-way horizontal principal stress field was derived using an anisotropic elastic model. This enabled the construction of a high-precision 1D anisotropic geomechanical model, which demonstrated significantly improved accuracy compared to the isotropic model.
This study established an anisotropic 1D geomechanical modeling workflow that provides a theoretical basis and technical support for reservoir stimulation and fracturing program design. The model's precision was improved by approximately 7% compared to the isotropic model. Validation against field data (e.g., well history records) revealed the distribution characteristics of anisotropic geomechanical parameters and in-situ stress along the wellbore. [Significance] The research findings serve as a foundational basis for geo-engineering integration, providing theoretical guidance and technical support for reservoir stimulation and hydraulic fracturing design.
| 科 Family | 属数 Number of genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) | 属 Genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) |
|---|---|---|---|---|---|---|
| 鹅膏菌科Amanitaceae | 2 | 11 | 5.26 | 鹅膏菌属 Amanita | 10 | 4.78 |
| 小菇科 Mycenaceae | 2 | 12 | 5.74 | 丝盖伞属 Inocybe | 5 | 2.39 |
| 多孔菌科 Polyporaceae | 8 | 14 | 6.70 | 蜡蘑属 Laccaria | 5 | 2.39 |
| 红菇科 Russulaceae | 3 | 23 | 11.00 | 小皮伞属 Marasmius | 6 | 2.87 |
| 小菇属 Mycena | 11 | 5.26 | ||||
| 光柄菇属 Pluteus | 5 | 2.39 | ||||
| 红菇属 Russula | 17 | 8.13 | ||||
| 栓菌属 Trametes | 5 | 2.39 |