The Dingshan–Dongxi area, located on the basin margin in southeastern Sichuan, lies at the junction of the eastern Sichuan fault–fold zone and the northern Guizhou fault–fold zone on the east side of the Luzhou–Chishui tectonic superposition zone. Due to multiple tectonic movements, the geological structure in this area is complex. The Longmaxi Formation in the study area is rich in shale gas resources, characterized by superior geological and reservoir conditions, and holds great potential for exploration and development. Clarifying the current in-situ stress state and its distribution is conducive to improving shale gas development efficiency. However, the complex in-situ stress field in this area leads to less accurate planar predictions and significant differences in the fracturing stimulation effects and production among horizontal wells.
This study provided a detailed interpretation of the in-situ stress direction in the well profile of the study area by integrating multi-source data, including core tests, well logging, and microseismic monitoring. Furthermore, the distribution characteristics of in-situ stress magnitudes among the well profile were clarified through hydraulic fracturing, acoustic emission experiments, and well logging. Refined geological modeling was performed on the structural deformation and fracture characteristics of the study area, and heterogeneous rock mechanical properties were assigned. Numerical simulation software was then applied to simulate the current in-situ stress distribution characteristics of the study area. Finally, based on the analysis of the influence of in-situ stress characteristics on fracturing stimulation effects, an in-situ stress zoning evaluation standard was constructed. Using the simulated in-situ stress field results, in-situ stress zoning was carried out in the Dingshan–Dongxi area, and the zoning results were verified through a retrospective evaluation of the fracturing effects of new wells.
The results show that the current in-situ stress direction in the study area is mostly near east –west, with local deflections caused by fractures and structural deformations. The maximum horizontal principle stress, minimum horizontal principle stress, and vertical principal stress range from 58.4 to 167.0 MPa, 38.6 to 135.4 MPa, and 54.7 to 148.2 MPa, respectively, indicating a strike-slip stress state. The stress difference (maximum minus minimum horizontal principal stress) mainly ranges from 5 to 30 MPa. The magnitude of in-situ stress and the stress difference are generally controlled by burial depth. In areas with high structural deformation, both in-situ stress and stress difference are lower. Near faults, in-situ stress is lower, but the stress difference is higher. Zoning was performed using a minimum horizontal principal stress of 80 MPa and a stress difference of 20 MPa as thresholds. [Conclusions] It is recommended that areas with low stress difference and low in-situ stress be selected for fracturing stimulation. These areas are mainly located in the high-structural parts of the gentle slope area in the middle of Dingshan, the slope area of Dongxi, and the northern part of the Dongxi fault and anticline area.[Significance] This study advances the understanding of the current in-situ stress field of the Longmaxi Formation on the southeastern margin of the Sichuan Basin and has significant practical value for optimizing fracturing stimulation.
| 科 Family | 属数 Number of genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) | 属 Genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) |
|---|---|---|---|---|---|---|
| 鹅膏菌科Amanitaceae | 2 | 11 | 5.26 | 鹅膏菌属 Amanita | 10 | 4.78 |
| 小菇科 Mycenaceae | 2 | 12 | 5.74 | 丝盖伞属 Inocybe | 5 | 2.39 |
| 多孔菌科 Polyporaceae | 8 | 14 | 6.70 | 蜡蘑属 Laccaria | 5 | 2.39 |
| 红菇科 Russulaceae | 3 | 23 | 11.00 | 小皮伞属 Marasmius | 6 | 2.87 |
| 小菇属 Mycena | 11 | 5.26 | ||||
| 光柄菇属 Pluteus | 5 | 2.39 | ||||
| 红菇属 Russula | 17 | 8.13 | ||||
| 栓菌属 Trametes | 5 | 2.39 |