收藏切换
A refined evaluation method for in-situ stresses in orthotropic shale formations
收藏切换
Bo ZENG1, 2, Junchuan GUI1, 2, *, Haoyong HUANG1, 2, Tianshou MA3, Shuai CUI1, 2, Guanghai ZHONG1, 2, Ersi XU1, 2
Journal of Geomechanics | 2026, 32(2) : 397 - 413
Less
收藏切换
Journal of Geomechanics | 2026, 32(2): 397-413
• Crustal Stress & Tectonic Stress Field •
A refined evaluation method for in-situ stresses in orthotropic shale formations
Full
Bo ZENG1, 2, Junchuan GUI1, 2, *, Haoyong HUANG1, 2, Tianshou MA3, Shuai CUI1, 2, Guanghai ZHONG1, 2, Ersi XU1, 2
Affiliations
  • 1Shale Gas Research Institute, Southwest Oil and Gas Field Company, PetroChina, Chengdu 610051, Sichuan, China
  • 2Sichuan Key Laboratory of Shale Gas Geological Evaluation and Efficient Development, Chengdu 610051, Sichuan, China
  • 3National Key Laboratory for Oil and Gas Reservoir Geology and Development Engineering, Southwest Petroleum University, Chengdu 610500, Sichuan, China
Published: 2026-04-28 doi: 10.12090/j.issn.1006-6616.2025002
Outline
收藏切换
Objective

To address the scarcity of methods for evaluating in-situ stress in orthotropic media, this study aims to develop a comprehensive in-situ stress evaluation method for shale formations by incorporating the orthotropic (ORT) characteristics of rocks.

Methods

The method first establishes the conversion relationship between dynamic and static mechanical parameters of anisotropic rocks. Based on the relationship between effective stress and strain, a general analytical expression for the Biot coefficient is derived, and specific solutions for different conditions are presented. An orthorhombic shale rock physics model is constructed using well-log data to obtain the stiffness matrix required for calculating orthorhombic elastic parameters and Biot coefficients. Starting from the generalized Hooke’s law for anisotropic media, a complete analytical expression for in-situ stress in orthorhombic formations is ultimately derived.

Results

The application of this method to well x1 demonstrates that: (1) the significant differences in elastic parameters between the horizontal and vertical directions of the ORT shale formation are addressed by establishing direction-specific dynamic–static parameter conversion models, enhancing the accuracy of static rock elastic parameter conversion; (2) the Biot coefficient $\alpha $11 (perpendicular to the bedding plane) is significantly smaller than $\alpha $33, with an average relative difference of 13.4%, while the differences between $\alpha $11 and $\alpha $22 (parallel to the bedding plane) are relatively small, indicating remarkable anisotropic characteristics of the Biot coefficients; (3) the ORT model not only provides a detailed stress profile that clearly reflects the V-shaped stress fluctuations caused by changes in clay content but also reduces the prediction errors of the minimum and maximum horizontal principal stresses to 1.9% and 4.0%, respectively. These values are lower than those of the traditional vertical–transverse–isotropy (VTI) model (5.8%, 5.2%) and the isotropy (ISO) model (8.2%, 10.9%).

Conclusions

The ORT in-situ stress evaluation method offers a more accurate and detailed assessment of in-situ stress in shale formations, which is significant for refining the design of drilling fluid density windows, developing fracturing parameters and processes, and determining well shutdown time after fracturing. [Significance]This study enriches the anisotropic geomechanics theory and provides a generalized analytical solution for in-situ stress calculation in ORT shale formations, and filling the methodological gap in anisotropic in-situ stress evaluation.

shale formation  /  orthotropic  /  biot coefficients  /  in-situ stress evaluation
曾波, 桂俊川, 黄浩勇, 马天寿, 崔帅, 钟光海, 徐尔斯. 正交各向异性页岩地层地应力精细评价方法. 地质力学学报, 2026 , 32 (2) : 397 -413 . DOI: 10.12090/j.issn.1006-6616.2025002
Bo ZENG, Junchuan GUI, Haoyong HUANG, Tianshou MA, Shuai CUI, Guanghai ZHONG, Ersi XU. A refined evaluation method for in-situ stresses in orthotropic shale formations[J]. Journal of Geomechanics, 2026 , 32 (2) : 397 -413 . DOI: 10.12090/j.issn.1006-6616.2025002
  • This research was financially supported by the National Natural Science Foundation of China (Grant No. 52374045), the Research Project of the Southwest Oil & Gas Field Branch of PetroChina (Grant No. 20220304-20), and the Science and Technology Special Project of China National Petroleum Corporation (Grant No. 2023ZZ14).
Year 2026 volume 32 Issue 2
32
13
Cite this Article
BibTeX
Article Info
doi: 10.12090/j.issn.1006-6616.2025002
  • Receive Date:2025-01-13
  • Online Date:2026-11-17
  • Published:2026-04-28
Article Data
Affiliations
History
  • Received:2025-01-13
  • Revised:2025-10-29
  • Accepted:2025-11-11
Funding
This research was financially supported by the National Natural Science Foundation of China (Grant No. 52374045), the Research Project of the Southwest Oil & Gas Field Branch of PetroChina (Grant No. 20220304-20), and the Science and Technology Special Project of China National Petroleum Corporation (Grant No. 2023ZZ14).
Affiliations
    1Shale Gas Research Institute, Southwest Oil and Gas Field Company, PetroChina, Chengdu 610051, Sichuan, China
    2Sichuan Key Laboratory of Shale Gas Geological Evaluation and Efficient Development, Chengdu 610051, Sichuan, China
    3National Key Laboratory for Oil and Gas Reservoir Geology and Development Engineering, Southwest Petroleum University, Chengdu 610500, Sichuan, China
References
Share
https://castjournals.cast.org.cn/joweb/dzlxxb/EN/10.12090/j.issn.1006-6616.2025002
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT