Home Journals Articles Updates About
CN
image
收藏切换
Design Method for Current Decoupling Controller of High-speed PMSM with High Robustness
收藏切换
Ziyue XU  Student Member, CPSS1, Jiannan QIN2
Journal of Power Supply | 2026, 24(8) : 275 - 285
Less
收藏切换
Journal of Power Supply | 2026, 24(8): 275-285
• Motor Drives and Control •
Design Method for Current Decoupling Controller of High-speed PMSM with High Robustness
Full
Ziyue XU  Student Member, CPSS1, Jiannan QIN2
Affiliations
  • 1.School of Automation, Nanjing University of Science and Technology, Nanjing 210094, China
  • 2.Engineering Training Center, Nanjing Forestry University, Nanjing 210037, China
Published: 2026-08-30 doi: 10.13234/j.issn.2095-2805.2026.8.275
Outline
收藏切换

To enhance the parameter robustness of the current decoupling controller of a high-speed permanent magnet synchronous motor (HSPMSM), first, a current decoupling controller with high parameter robustness is proposed. Then, a parameter optimization design method is put forward. Based on the zero-pole cancellation principle, the proposed method directly designs the current decoupling controller in the discrete-domain, which can effectively overcome the delay effect of the digital control system under low carrier ratio conditions, thus greatly improving the parameter robustness of the controller. Finally, experimental results based on the HSPMSM verified the effectiveness of the proposed method.

High-speed permanent magnet synchronous motor (HSPMSM)  /  decoupling control  /  high parameter robustness  /  discrete-domain direct design method
徐子悦中国电源学会学生会员, 秦建楠. 高速永磁同步电机高鲁棒性电流解耦控制器设计方法. 电源学报, 2026 , 24 (8) : 275 -285 . DOI: 10.13234/j.issn.2095-2805.2026.8.275
Ziyue XU, Jiannan QIN. Design Method for Current Decoupling Controller of High-speed PMSM with High Robustness[J]. Journal of Power Supply, 2026 , 24 (8) : 275 -285 . DOI: 10.13234/j.issn.2095-2805.2026.8.275
Funding
Less
  • Key R&D Program of Jiangsu Province(BE2021016)
Appendix
Less
Year 2026 volume 24 Issue 8
25
3
Cite this Article
BibTeX
Article Info
doi: 10.13234/j.issn.2095-2805.2026.8.275
  • Receive Date：2024-09-10
  • Online Date：2026-10-29
  • Published：2026-08-30
Article Data
Affiliations
History
  • Received：2024-09-10
  • Revised：2024-12-21
  • Accepted：2024-12-29
Funding
Key R&D Program of Jiangsu Province(BE2021016)
Affiliations
    1.School of Automation, Nanjing University of Science and Technology, Nanjing 210094, China
    2.Engineering Training Center, Nanjing Forestry University, Nanjing 210037, China
References
Share
https://castjournals.cast.org.cn/joweb/dyxb/EN/10.13234/j.issn.2095-2805.2026.8.275
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family		 属数
Number of
genus		 种数
Number of
species		 占总种数比例
Percentage of
total species (%)		 属
Genus		 种数
Number of
species		 占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT
Links
Articles
Latest Articles
Most Read
Collections
Updates
Events
News
Multimedia
About
About Us
Contact
No. 86 Xueyuan South Road, Haidian District, Beijing
100081
010-62662699(Operation and Technical Support)
qkjq@cast.org.cn

Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House