收藏切换
Study on Calculation Method for Litz Wire Winding Losses in Distributed Air Gap Transformer
收藏切换
Kun SHEN1, Shimao LI1, Xiaosheng HUANG1, Yipeng KONG2, Wei CHEN2
Journal of Power Supply | 2026, 24(1) : 10 - 20
Less
收藏切换
Journal of Power Supply | 2026, 24(1): 10-20
• Passive Devices •
Study on Calculation Method for Litz Wire Winding Losses in Distributed Air Gap Transformer
Full
Kun SHEN1, Shimao LI1, Xiaosheng HUANG1, Yipeng KONG2, Wei CHEN2
Affiliations
  • 1.School of Electronic, Electrical Engineering and Physics, Fujian University of Technology, Fuzhou 350118, China
  • 2.College of Electrical Engineering and Automation, Fuzhou University, Fuzhou 350108, China
Published: 2026-01-30 doi: 10.13234/j.issn.2095-2805.2026.1.10
Outline
收藏切换

The calculation of high-frequency transformer winding losses is crucial for optimizing the efficiency of CLLC converters. However, there remains a lack of accurate and efficient methods for calculating the winding losses, particularly the winding losses in Litz wire. A mutual-impedance equivalent circuit-based method for calculating the winding losses in Litz wire high-frequency transformers is proposed. First, the analytical approaches for calculating the Litz wire winding losses based on a one-dimensional Dowell model and a two-dimensional Bessel function method are comparatively analyzed. Then, a mutual-impedance equivalent model is established to simplify the calculation of winding losses. A specific case study is given, and the values calculated using the proposed method are compared with the impedance matrix results derived from two-dimensional finite element simulations. Results demonstrate that the relative error between the equivalent series resistances calculated using the proposed method and the results based on the finite element method does not exceed 6%, validating the effectiveness and accuracy of the proposed method. Finally, a high-frequency transformer prototype for the CLLC converter was constructed, and experimental measurements verified the feasibility of the proposed method.

CLLC resonant converter  /  Litz wire  /  winding loss  /  Dowell model  /  finite element model
沈焜, 李世茂, 黄晓生, 孔毅鹏, 陈为. 分布气隙变压器的利兹线绕组损耗计算方法研究. 电源学报, 2026 , 24 (1) : 10 -20 . DOI: 10.13234/j.issn.2095-2805.2026.1.10
Kun SHEN, Shimao LI, Xiaosheng HUANG, Yipeng KONG, Wei CHEN. Study on Calculation Method for Litz Wire Winding Losses in Distributed Air Gap Transformer[J]. Journal of Power Supply, 2026 , 24 (1) : 10 -20 . DOI: 10.13234/j.issn.2095-2805.2026.1.10
  • Natural Science Foundation of Fujian Province(2023J01949; 2022J01950)
Year 2026 volume 24 Issue 1
51
6
Cite this Article
BibTeX
Article Info
doi: 10.13234/j.issn.2095-2805.2026.1.10
  • Receive Date:2024-12-19
  • Online Date:2026-10-26
  • Published:2026-01-30
Article Data
Affiliations
History
  • Received:2024-12-19
  • Revised:2025-02-26
  • Accepted:2025-03-06
Funding
Natural Science Foundation of Fujian Province(2023J01949; 2022J01950)
Affiliations
    1.School of Electronic, Electrical Engineering and Physics, Fujian University of Technology, Fuzhou 350118, China
    2.College of Electrical Engineering and Automation, Fuzhou University, Fuzhou 350108, China
References
Share
https://castjournals.cast.org.cn/joweb/dyxb/EN/10.13234/j.issn.2095-2805.2026.1.10
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT