收藏切换
Fault Protection Method for Flexible DC Power Grid Based on Canberra Distance
收藏切换
Zhanye YANG1, 2, Yanfang WEI3, Jingwen ZHAO4, Peng WANG5, Zhihui ZENG3
Journal of Power Supply | 2026, 24(6) : 255 - 264
Less
收藏切换
Journal of Power Supply | 2026, 24(6): 255-264
• Power Electronic Dominated Power Systems •
Fault Protection Method for Flexible DC Power Grid Based on Canberra Distance
Full
Zhanye YANG1, 2, Yanfang WEI3, Jingwen ZHAO4, Peng WANG5, Zhihui ZENG3
Affiliations
  • 1.Hainan Holdings Energy Co., Ltd., Haikou 570125, China
  • 2.Hainan Institute of Green Energy and Environmental Engineering Technology, Haikou 570125, China
  • 3.School of Electrical Engineering and Automation, Henan Polytechnic University, Jiaozuo 454003, China
  • 4.Ultra High Voltage Company, State Grid Henan Electric Power Company, Zhengzhou 450000, China
  • 5.Electric Power Research Institute, State Grid Henan Electric Power Company, Zhengzhou 450052, China
Published: 2026-06-30 doi: 10.13234/j.issn.2095-2805.2026.6.255
Outline
收藏切换

The flexible DC distribution network has characteristics such as a fast rising speed and a large amplitude of fault current. Therefore, the fast and reliable identification of DC line faults is a key technology that the DC distribution networks urgently need to break through. Aimed at the problems of poor selectivity of single-end protection and a slow speed of multi-end protection in the existing flexible DC power grids, a fault protection method for flexible DC power grid based on the Canberra distance is proposed. First, according to the difference in polarity of current differential between the two terminals under internal and external faults in the flexible DC power grid, the Canberra distance is introduced to calculate the polarity similarity of fault current differential sampled at both ends of the line, so as to perform diagnosis of the fault area. Second, based on the fault characteristics of fault and non-fault lines at the time of fault occurrence, a ratio is formulated using the numerical difference in current differential between the two poles, thus selecting the fault pole. Finally, different fault scenarios are set to verify the applicability of the proposed method under different working conditions. Simulation results show that the proposed protection scheme can achieve correct fault location and pole selection under the conditions of different fault locations, different values of current-limiting reactance and different transition resistances.

Flexible DC power grid  /  fault current differential  /  Canberra distance  /  fault identification  /  regional diagnosis
杨湛晔, 韦延方, 赵靖雯, 王鹏, 曾志辉. 基于Canberra距离的柔性直流电网故障保护方法. 电源学报, 2026 , 24 (6) : 255 -264 . DOI: 10.13234/j.issn.2095-2805.2026.6.255
Zhanye YANG, Yanfang WEI, Jingwen ZHAO, Peng WANG, Zhihui ZENG. Fault Protection Method for Flexible DC Power Grid Based on Canberra Distance[J]. Journal of Power Supply, 2026 , 24 (6) : 255 -264 . DOI: 10.13234/j.issn.2095-2805.2026.6.255
  • National Natural Science Foundation of China(52177114)
  • Hainan Provincial Natural Science Foundation of China(521RC1110)
Year 2026 volume 24 Issue 6
38
8
Cite this Article
BibTeX
Article Info
doi: 10.13234/j.issn.2095-2805.2026.6.255
  • Receive Date:2024-05-31
  • Online Date:2026-10-29
  • Published:2026-06-30
Article Data
Affiliations
History
  • Received:2024-05-31
  • Revised:2024-07-31
  • Accepted:2024-08-13
Funding
National Natural Science Foundation of China(52177114)
Hainan Provincial Natural Science Foundation of China(521RC1110)
Affiliations
    1.Hainan Holdings Energy Co., Ltd., Haikou 570125, China
    2.Hainan Institute of Green Energy and Environmental Engineering Technology, Haikou 570125, China
    3.School of Electrical Engineering and Automation, Henan Polytechnic University, Jiaozuo 454003, China
    4.Ultra High Voltage Company, State Grid Henan Electric Power Company, Zhengzhou 450000, China
    5.Electric Power Research Institute, State Grid Henan Electric Power Company, Zhengzhou 450052, China
References
Share
https://castjournals.cast.org.cn/joweb/dyxb/EN/10.13234/j.issn.2095-2805.2026.6.255
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT