收藏切换
DC-DC Converter Based on Switching Voltage Doubling Clamping Unit
收藏切换
Limin QUAN1, Min ZHANG1, Haitao JIA1, Pengfei XUE1, Haidong LI2
Journal of Power Supply | 2026, 24(3) : 30 - 36
Less
收藏切换
Journal of Power Supply | 2026, 24(3): 30-36
• Power Converter Topologies •
DC-DC Converter Based on Switching Voltage Doubling Clamping Unit
Full
Limin QUAN1, Min ZHANG1, Haitao JIA1, Pengfei XUE1, Haidong LI2
Affiliations
  • 1.School of Information and Control Engineering, Qingdao University of Technology, Qingdao 266520, China
  • 2.Beijing Leigong Zhichuang Technology Co., Ltd., Beijing 100192, China
Published: 2026-03-30 doi: 10.13234/j.issn.2095-2805.2026.3.30
Outline
收藏切换

In the wide conversion range applications of traditional DC-DC converters, there is an urgent need for higher voltage gain, efficiency and reliability. A DC-DC converter based on a switching voltage doubling clamping unit is proposed and analyzed. In this topology, the switch voltage stress is low and the inherent duty cycle is small, which helps reduce switch losses and improve the converter efficiency. All the switch devices achieve voltage clamping, thus reducing the voltage spikes generated during switch transitions. Compared with coupled windings, the single-input inductor reduces the size of the converter and the input current ripple. The shared grounding of input and output terminals ensures the output reliability. Through a comparison with other typical converters and performance analysis with a combination of a 200 W experimental prototype, the feasibility and effectiveness of the DC-DC converter based on the switching voltage doubling clamping unit were validated.

DC-DC converter  /  high efficiency  /  passive clamp  /  voltage doubling unit
权利敏, 张民, 贾海涛, 薛鹏飞, 李海东. 基于开关倍压钳位单元的DC-DC变换器. 电源学报, 2026 , 24 (3) : 30 -36 . DOI: 10.13234/j.issn.2095-2805.2026.3.30
Limin QUAN, Min ZHANG, Haitao JIA, Pengfei XUE, Haidong LI. DC-DC Converter Based on Switching Voltage Doubling Clamping Unit[J]. Journal of Power Supply, 2026 , 24 (3) : 30 -36 . DOI: 10.13234/j.issn.2095-2805.2026.3.30
  • National Natural Science Foundation of China(62541318)
  • Shandong Provincial Natural Science and Technology Foundation(ZR2025QC655; ZR2022ME214)
Year 2026 volume 24 Issue 3
42
7
Cite this Article
BibTeX
Article Info
doi: 10.13234/j.issn.2095-2805.2026.3.30
  • Receive Date:2023-05-18
  • Online Date:2026-10-29
  • Published:2026-03-30
Article Data
Affiliations
History
  • Received:2023-05-18
  • Revised:2023-11-21
  • Accepted:2023-11-28
Funding
National Natural Science Foundation of China(62541318)
Shandong Provincial Natural Science and Technology Foundation(ZR2025QC655; ZR2022ME214)
Affiliations
    1.School of Information and Control Engineering, Qingdao University of Technology, Qingdao 266520, China
    2.Beijing Leigong Zhichuang Technology Co., Ltd., Beijing 100192, China
References
Share
https://castjournals.cast.org.cn/joweb/dyxb/EN/10.13234/j.issn.2095-2805.2026.3.30
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT