收藏切换
Method for Wide-band Impedance Measurement Based on Discrete Interval Binary Sequence with Optimized Spectrum
收藏切换
Shaohua HAN1, Yunlong JIANG2, Xuan GE1, Jianyu YU2, Liqin CHEN3, Yandong CHEN3
Journal of Power Supply | 2026, 24(2) : 312 - 323
Less
收藏切换
Journal of Power Supply | 2026, 24(2): 312-323
• EMI/EMC •
Method for Wide-band Impedance Measurement Based on Discrete Interval Binary Sequence with Optimized Spectrum
Full
Shaohua HAN1, Yunlong JIANG2, Xuan GE1, Jianyu YU2, Liqin CHEN3, Yandong CHEN3
Affiliations
  • 1.Suqian Power Supply Branch, State Grid Jiangsu Electric Power Co., Ltd., Suqian 223800, China
  • 2.Electric Power Research Institute, State Grid Jiangsu Electric Power Co., Ltd., Nanjing 211103, China
  • 3.State Key Laboratory of High-efficiency and High-quality Conversion for Electric Power, Hunan University, Changsha 410082, China
Published: 2026-02-28 doi: 10.13234/j.issn.2095-2805.2026.2.312
Outline
收藏切换

With a large number of renewable energy devices being integrated into DC distribution network, the factors such as the random fluctuation of photovoltaic power generation and unpredictability of loads will have an impact on the system stability. During its operation, the system has characteristics of being dominated by power electronic equipment and time-varying. To ensure the efficient and stable operation of the DC distribution network, it is crucial for obtaining the impedance characteristics of power electronic equipment in the distribution network accurately in real time. A wide-band impedance measurement method based on discrete interval binary sequence (DIBS) with optimized spectrum is proposed, and the phase optimization formula and Nelder-Mead algorithm are used for optimizing the phase of each frequency component of the DIBS generating signal. In addition, the methods of generating signal and amplitude selection are improved, so that the signal spectrum is focused on the target frequency band, and the measurement efficiency and accuracy are improved. To verify the effectiveness of the proposed method, the time-domain waveforms and spectra of the multi-sinusoidal signal and optimized DIBS signal are compared, and simulations are carried out in Matlab/Simulink to verify the method. Results show that the injected voltage amplitude of DIBS is smaller and can accurately measure the impedance characteristics of power electronic equipment with the same signal spectral energy. Finally, passive load impedance measurement experiments were carried out on a hardware platform to verify the effectiveness of the proposed method.

Impedance measurement  /  binary sequence  /  spectrum optimization  /  DC distribution network
韩少华, 姜云龙, 葛萱, 喻建瑜, 陈励勤, 陈燕东. 频谱优化的离散区间二进制序列宽频带阻抗测量方法. 电源学报, 2026 , 24 (2) : 312 -323 . DOI: 10.13234/j.issn.2095-2805.2026.2.312
Shaohua HAN, Yunlong JIANG, Xuan GE, Jianyu YU, Liqin CHEN, Yandong CHEN. Method for Wide-band Impedance Measurement Based on Discrete Interval Binary Sequence with Optimized Spectrum[J]. Journal of Power Supply, 2026 , 24 (2) : 312 -323 . DOI: 10.13234/j.issn.2095-2805.2026.2.312
  • Science and Technology Project of State Grid Jiangsu Electric Power Co., Ltd.(J2023045)
Year 2026 volume 24 Issue 2
27
5
Cite this Article
BibTeX
Article Info
doi: 10.13234/j.issn.2095-2805.2026.2.312
  • Receive Date:2024-12-05
  • Online Date:2026-10-29
  • Published:2026-02-28
Article Data
Affiliations
History
  • Received:2024-12-05
  • Revised:2025-01-05
  • Accepted:2025-02-08
Funding
Science and Technology Project of State Grid Jiangsu Electric Power Co., Ltd.(J2023045)
Affiliations
    1.Suqian Power Supply Branch, State Grid Jiangsu Electric Power Co., Ltd., Suqian 223800, China
    2.Electric Power Research Institute, State Grid Jiangsu Electric Power Co., Ltd., Nanjing 211103, China
    3.State Key Laboratory of High-efficiency and High-quality Conversion for Electric Power, Hunan University, Changsha 410082, China
References
Share
https://castjournals.cast.org.cn/joweb/dyxb/EN/10.13234/j.issn.2095-2805.2026.2.312
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT