收藏切换
Modeling of DC Charging Pile for Electric Vehicles Based on Two-stage Structure
收藏切换
PDF
Chuangchuang YANG1, Bo YU1, 2
Journal of Power Supply | 2024, 22(4) : 74 - 82
Less
收藏切换
Journal of Power Supply | 2024, 22(4): 74-82
AC-DC Converters
Modeling of DC Charging Pile for Electric Vehicles Based on Two-stage Structure
Full
Chuangchuang YANG1, Bo YU1, 2
Affiliations
  • 1 State Grid Electric Power Research Institute Nanjing 211106 China
  • 2 Experiment and Verification Center Nanjing 211106 China
Published: 2024-07-30 doi: 10.13234/j.issn.2095-2805.2024.4.74
Outline
收藏切换

Based on the two-stage (AC/DC and DC/DC) structure of a DC charging pile for electric vehicles(EVs) and through the analysis of the functional requirements of the two-stage circuit structure, a MATLAB/Simulink simulation model is built with a main circuit which consists of a Vienna circuit as the front-stage AC/DC rectifier and a Buck-Boost circuit as the rear-stage DC/DC voltage conversion circuit. Simulations are performed with load set as a pure resistive load and the PNGV model of a battery, respectively. Simulation results meet the requirement of parameters such as output voltage stability accuracy, output voltage ripple and input current harmonics, which proves that the model can be used to analyze the power grid loaded by EVs and promote the study on the impact of EVs on power grid.

DC charging pile  /  two-stage circuit  /  simulation model  /  PI control
Chuangchuang YANG, Bo YU. Modeling of DC Charging Pile for Electric Vehicles Based on Two-stage Structure[J]. Journal of Power Supply, 2024 , 22 (4) : 74 -82 . DOI: 10.13234/j.issn.2095-2805.2024.4.74
Year 2024 volume 22 Issue 4
PDF
363
137
Cite this Article
BibTeX
Article Info
doi: 10.13234/j.issn.2095-2805.2024.4.74
  • Receive Date:2021-11-16
  • Online Date:2025-07-21
  • Published:2024-07-30
Article Data
Affiliations
History
  • Received:2021-11-16
  • Revised:2022-03-22
  • Accepted:2022-04-06
Affiliations
    1 State Grid Electric Power Research Institute Nanjing 211106 China
    2 Experiment and Verification Center Nanjing 211106 China
References
Share
https://castjournals.cast.org.cn/joweb/dyxb/EN/10.13234/j.issn.2095-2805.2024.4.74
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT