收藏切换
InSAR deformation monitoring of carbon sequestration areas considering GNSS atmospheric correction
收藏切换
ChuHan ZHONG1, ZhiPeng REN2, *, ShuangCheng ZHANG2, WenYuan ZHANG1, Jun LI2, ZhiLei YE2, Bo WANG1
Progress in Geophysics | 2026, 41(1) : 95 - 103
Less
收藏切换
Progress in Geophysics | 2026, 41(1): 95-103
InSAR deformation monitoring of carbon sequestration areas considering GNSS atmospheric correction
Full
ChuHan ZHONG1, ZhiPeng REN2, *, ShuangCheng ZHANG2, WenYuan ZHANG1, Jun LI2, ZhiLei YE2, Bo WANG1
Affiliations
  • 1SINOPEC Petroleum Engineering Corporation, Dongying 257026, China
  • 2College of Geology Engineering and Geomatics, Chang'an University, Xi'an 710054, China
Published: 2026-02-20 doi: 10.6038/pg2026JJ0046
Outline
收藏切换

Carbon Capture, Utilization, and Storage (CCUS) has emerged as a effective strategy for mitigating atmospheric CO2 emissions. However, the large-scale subsurface injection of CO2 may induce ground surface deformation, potentially compromising the long-term integrity of CO2 storage. To investigate surface displacement patterns in CCUS project areas following CO2 injection, this study employed the Small Baseline Subset Interferometric Synthetic Aperture Radar (SBAS-InSAR) technique to analyze 45 ascending Sentinel-1A images acquired between January 2022 and August 2024, enabling comprehensive deformation monitoring over a 2.5-year period in a Chinese CCUS geological storage site. Recognizing the impact of tropospheric delay errors on InSAR measurements, we developed an enhanced atmospheric delay correction approach synergizing Global Navigation Satellite System (GNSS) data and ERA5 reanalysis data, specifically optimized for small-scale regional applications. Analysis of the phase-unwrapped interferograms confirms that our GNSS-constrained atmospheric correction approach significantly reduces tropospheric delay artifacts in localized interferometric observations. The derived InSAR deformation field reveals distinct surface displacement patterns in the CO2 injection zone, with measured vertical deformation rates ranging from 0 to 10 mm/a. Deformation time series analysis at monitoring points adjacent to injection wells reveals a consistent response: initial surface uplift immediately following CO2 injection, followed by gradual subsidence after several months. This pattern was confirmed through comparative analysis of InSAR-derived vertical displacements (converted from LOS measurements) and independent GNSS observations. This study demonstrates that the synergistic use of GNSS and InSAR technologies enables precise monitoring of millimeter-scale surface deformation in CCUS operational areas. The GNSS infrastructure serves dual purposes: (1) enhancing InSAR measurement accuracy through tropospheric delay correction, and (2) providing independent validation of InSAR-derived deformation results. These findings underscore the critical importance of integrated geodetic monitoring for ensuring the safety and efficacy of CO2 geological storage operations.

Carbon sequestration  /  Time-series InSAR  /  GNSS  /  Atmospheric correction  /  Surface monitoring
钟储汉, 任志鹏, 张双成, 张雯缘, 李军, 叶志磊, 王波. 顾及GNSS大气改正的陆地碳封存InSAR形变监测研究. 地球物理学进展, 2026 , 41 (1) : 95 -103 . DOI: 10.6038/pg2026JJ0046
ChuHan ZHONG, ZhiPeng REN, ShuangCheng ZHANG, WenYuan ZHANG, Jun LI, ZhiLei YE, Bo WANG. InSAR deformation monitoring of carbon sequestration areas considering GNSS atmospheric correction[J]. Progress in Geophysics, 2026 , 41 (1) : 95 -103 . DOI: 10.6038/pg2026JJ0046
Year 2026 volume 41 Issue 1
227
95
Cite this Article
BibTeX
Article Info
doi: 10.6038/pg2026JJ0046
  • Receive Date:2025-04-28
  • Online Date:2026-09-23
  • Published:2026-02-20
Article Data
Affiliations
History
  • Received:2025-04-28
  • Revised:2025-09-21
Affiliations
    1SINOPEC Petroleum Engineering Corporation, Dongying 257026, China
    2College of Geology Engineering and Geomatics, Chang'an University, Xi'an 710054, China
References
Share
https://castjournals.cast.org.cn/joweb/dqwlxjz/EN/10.6038/pg2026JJ0046
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT