收藏切换
Identification of Voltage Saddle Node Bifurcation Point in Power System Based on Quadratic Form Approximation Method
收藏切换
PDF
Junlin ZHANG, Lianghua NI, Jia SUN, Ganyun LÜ, Jinhua ZHANG
Electric Drive | 2024, 54(3) : 68 - 75
Less
收藏切换
Electric Drive | 2024, 54(3): 68-75
Identification of Voltage Saddle Node Bifurcation Point in Power System Based on Quadratic Form Approximation Method
Full
Junlin ZHANG, Lianghua NI, Jia SUN, Ganyun LÜ, Jinhua ZHANG
Affiliations
  • School of Electric Power Engineering,Nanjing Institute of Technology,Nanjing 211167,Jiangsu,China
Published: 2024-03-20 doi: 10.19457/j.1001-2095.dqcd25193
Outline
收藏切换

In order to intervale evaluate saddle node bifurcation points(SNB) in a power system during load growth quickly and accurately, a quadratic approximation method to directly calculate the power system voltage collapse point of was proposed. Based on the approximate quadratic PV-curve of output PQ nodes in the system, load parameters were introduced into the node power balance equation, by using the complex function derivative rules to differentiate power equation twice, the first and second derivatives of node voltage to load parameters were derived theoretically, and the expression of PV curve function was further determined, then vertex coordinates were used to determine the initial position of saddle junction bifurcation point in the power system and the voltage collapse point was approximated by multiple iterations of convergence. The proposed method avoids multiple power flow calculations using the continuous power flow method,significantly reducing computational complexity. Simulation results on IEEE 14 and IEEE 118 bus systems demonstrate the effectiveness of this method. Compared with the supplemented P'Q node method and Thevenin's equivalent method, the quadratic form iterative approximation method has higher computational efficiency and robustness.

saddle node bifurcation point(SNB)  /  loading parameter  /  PV curve  /  quadratic approximation
Junlin ZHANG, Lianghua NI, Jia SUN, Ganyun LÜ, Jinhua ZHANG. Identification of Voltage Saddle Node Bifurcation Point in Power System Based on Quadratic Form Approximation Method[J]. Electric Drive, 2024 , 54 (3) : 68 -75 . DOI: 10.19457/j.1001-2095.dqcd25193
Year 2024 volume 54 Issue 3
PDF
222
105
Cite this Article
BibTeX
Article Info
doi: 10.19457/j.1001-2095.dqcd25193
  • Receive Date:2023-06-20
  • Online Date:2025-12-12
  • Published:2024-03-20
Article Data
Affiliations
History
  • Received:2023-06-20
  • Revised:2023-06-26
Funding
Affiliations
    School of Electric Power Engineering,Nanjing Institute of Technology,Nanjing 211167,Jiangsu,China
References
Share
https://castjournals.cast.org.cn/joweb/dqcd/EN/10.19457/j.1001-2095.dqcd25193
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT