收藏切换
Identification Method for Topology and Line Parameter of Distribution Network Based on Improved Correntropy Matching Pursuit
收藏切换
PDF
Mengen SUN1, Haiming GONG1, Jie ZHAO1, Rongrong SUN1, Huiwen LU1, Hui WANG2
Electric Drive | 2025, 55(6) : 81 - 88
Less
收藏切换
Electric Drive | 2025, 55(6): 81-88
Identification Method for Topology and Line Parameter of Distribution Network Based on Improved Correntropy Matching Pursuit
Full
Mengen SUN1, Haiming GONG1, Jie ZHAO1, Rongrong SUN1, Huiwen LU1, Hui WANG2
Affiliations
  • 1 Shenzhen Power Supply Co.,Ltd.,Shenzhen 518081,Guangdong,China
  • 2 State Grid Electric Power Research Institute,Nanjing 210061,Jiangsu,China
Published: 2025-06-20 doi: 10.19457/j.1001-2095.dqcd25650
Outline
收藏切换

Accurate topology and line parameter information is the basis of state estimation and security control of distribution network. Affected by the performance of collection terminals and environmental factors,the measurement error of metering equipment often deviates from Gaussian distribution. Higher requirements are put forward for the robustness of topology and parameter identification model under non-Gaussian noise measurements.The mathematical optimization model of distribution network parameter identification was firstly constructed with the goal of minimizing power estimation error. In order to improve the performance of identification algorithm in complex error scenarios,the correntropy induced loss function was established,and an improved correntropy matching pursuit (CMP) algorithm was proposed based on half-quadratic optimization and noise filtering. Finally,the simulation analysis was carried out on IEEE 33- and 85-bus distribution system,and the test results show that the proposed method can correctly identify the topology and effectively estimate the line parameters in both Gaussian and non-Gaussian data noise scenarios.

distribution network  /  topology identification  /  line parameter identification  /  correntropy induced metric (CIM)  /  correntropy matching pursuit (CMP)
Mengen SUN, Haiming GONG, Jie ZHAO, Rongrong SUN, Huiwen LU, Hui WANG. Identification Method for Topology and Line Parameter of Distribution Network Based on Improved Correntropy Matching Pursuit[J]. Electric Drive, 2025 , 55 (6) : 81 -88 . DOI: 10.19457/j.1001-2095.dqcd25650
Year 2025 volume 55 Issue 6
PDF
139
61
Cite this Article
BibTeX
Article Info
doi: 10.19457/j.1001-2095.dqcd25650
  • Receive Date:2024-02-18
  • Online Date:2025-10-30
  • Published:2025-06-20
Article Data
Affiliations
History
  • Received:2024-02-18
  • Revised:2024-06-24
Funding
Affiliations
    1 Shenzhen Power Supply Co.,Ltd.,Shenzhen 518081,Guangdong,China
    2 State Grid Electric Power Research Institute,Nanjing 210061,Jiangsu,China
References
Share
https://castjournals.cast.org.cn/joweb/dqcd/EN/10.19457/j.1001-2095.dqcd25650
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT