收藏切换
Mechanical Properties' Simulation Analysis of a Tower Slewing Platform
收藏切换
PDF
Liqun LI, Kai HUANG, Youhuan XIANG, Hanbin LIU
Missiles and Space Vehicles | 2024, 47(4) : 57 - 63
Less
收藏切换
Missiles and Space Vehicles | 2024, 47(4): 57-63
Launch Support
Mechanical Properties' Simulation Analysis of a Tower Slewing Platform
Full
Liqun LI, Kai HUANG, Youhuan XIANG, Hanbin LIU
Affiliations
  • Unit 63729,Taiyuan,030031
Published: 2024-08-25 doi: 10.7654/j.issn.2097-1974.20240410
Outline
收藏切换

To study the safety of a tower slewing platform structure, a three dimensional numerical model is established with actual sizes and operating conditions. The structural force, pressure margin of hydraulic system with different wind loads, and the influence of lift platforms’ amount are researched which are concerned closely in use. In working condition, the maximum stress of structure is ${223.98}\mathrm{{MPa}}$, and the structure safety factor is 1.58 . The pressure margin of hydraulic system is calculated with the worst wind direction and the maximum windward area. When the platform is opened with permitted wind speed, the hydraulic system pressure can not be lower than ${5.40}\mathrm{{MPa}}$, and the pressure margin is 2.96. The structure safety factor is 1.35 when the number of lift platforms is 9. According to the results of simulating calculation, the security of the slewing platform can be confirmed. The simulating model can provide a reference for the slewing platform’s application.

numerical calculation  /  slewing platform  /  wind load  /  hydraulic system  /  bearing
Liqun LI, Kai HUANG, Youhuan XIANG, Hanbin LIU. Mechanical Properties' Simulation Analysis of a Tower Slewing Platform[J]. Missiles and Space Vehicles, 2024 , 47 (4) : 57 -63 . DOI: 10.7654/j.issn.2097-1974.20240410
Year 2024 volume 47 Issue 4
PDF
348
142
Cite this Article
BibTeX
Article Info
doi: 10.7654/j.issn.2097-1974.20240410
  • Receive Date:2024-01-24
  • Online Date:2025-07-04
  • Published:2024-08-25
Article Data
Affiliations
History
  • Received:2024-01-24
  • Revised:2024-04-29
Affiliations
    Unit 63729,Taiyuan,030031
References
Share
https://castjournals.cast.org.cn/joweb/ddyht/EN/10.7654/j.issn.2097-1974.20240410
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT