收藏切换
Uniformity of microstructure and properties of Al-Zn-Mg-Cu alloy ingots
收藏切换
Jingtao Wang1, 2, Ning Sun1
Journal of Materials and Metallurgy | 2026, 25(5) : 541 - 548
Less
收藏切换
Journal of Materials and Metallurgy | 2026, 25(5): 541-548
• Research Paper •
Uniformity of microstructure and properties of Al-Zn-Mg-Cu alloy ingots
Full
Jingtao Wang1, 2, Ning Sun1
Affiliations
  • 1.National Engineering Research Center for Plastic Working of Aluminium Alloys, Shandong Nanshan Aluminium Co., Ltd. , Longkou 265700, China
  • 2.Yantai Nanshan University, Materials Science and Engineering, Longkou 265700, China
Published: 2026-09-10 doi: 10.14186/j.cnki.1671-6620.2025.107
Outline
收藏切换

By means of microstructure characterization and property testing, the uniformity of microstructure and properties of a 480 mm thick high-alloyed Al-Zn-Mg-Cu alloy flat ingot prepared by semi-continuous casting in industrial mass production has been investigated. Inductively coupled plasma optical emission spectrometry (ICP-OES) is adopted to detect the distribution of alloying element contents at different thickness positions of the ingot. Optical microscopy (OM), scanning electron microscopy (SEM), and other equipment are used to characterize the grain morphology, type, and content of second phases at various thickness locations. A microhardness tester and electrical conductivity tester are employed to measure the differences in mechanical and conductive properties of the ingot at different thickness positions. The results show that segregation of alloying elements including Zn, Mg, and Cu exists within the range of 100~150 mm from the surface along the thickness direction of the ingot. Four types of grain morphologies appear sequentially along the 8 mm section from the solidified shell layer to the center of the ingot, namely shell fine-grained zone, non-uniform columnar grain zone, equiaxed grain zone with few dendrites and compounds, and local zone with densely distributed dendrites and compounds. The near-surface region of the ingot exhibits a relatively small number of secondary dendrites; as extending from the surface towards the center along the thickness direction, the dendrite features become more prominent, and the grain size increases gradually. In addition, abundant large-sized non-equilibrium second phases are distributed at the 1/4 thickness position of the ingot. Affected by these coarse non-equilibrium precipitates, this position exhibits the lowest microhardness (HV) and highest electrical conductivity, which are 135.6 and 41.2 %IACS, respectively.

Al-Zn-Mg-Cu alloy  /  ingot  /  second phase  /  microhardness  /  conductivity
王经涛, 孙宁. Al-Zn-Mg-Cu合金铸锭组织及性能均匀性. 材料与冶金学报, 2026 , 25 (5) : 541 -548 . DOI: 10.14186/j.cnki.1671-6620.2025.107
Jingtao Wang, Ning Sun. Uniformity of microstructure and properties of Al-Zn-Mg-Cu alloy ingots[J]. Journal of Materials and Metallurgy, 2026 , 25 (5) : 541 -548 . DOI: 10.14186/j.cnki.1671-6620.2025.107
Year 2026 volume 25 Issue 5
45
11
Cite this Article
BibTeX
Article Info
doi: 10.14186/j.cnki.1671-6620.2025.107
  • Receive Date:2025-05-07
  • Online Date:2026-11-13
  • Published:2026-09-10
Article Data
Affiliations
History
  • Received:2025-05-07
Funding
Affiliations
    1.National Engineering Research Center for Plastic Working of Aluminium Alloys, Shandong Nanshan Aluminium Co., Ltd. , Longkou 265700, China
    2.Yantai Nanshan University, Materials Science and Engineering, Longkou 265700, China
References
Share
https://castjournals.cast.org.cn/joweb/clyyjxb/EN/10.14186/j.cnki.1671-6620.2025.107
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT