收藏切换
Numerical investigation on the effect of slag length on the wear of ascending flue walls during copper flash smelting process
收藏切换
Junpeng Zhang1, Xiwen Mu2, 3, Jiake Tian4, Yang Zhang3, Hao Zhang2
Journal of Materials and Metallurgy | 2026, 25(5) : 516 - 524
Less
收藏切换
Journal of Materials and Metallurgy | 2026, 25(5): 516-524
• Research Paper •
Numerical investigation on the effect of slag length on the wear of ascending flue walls during copper flash smelting process
Full
Junpeng Zhang1, Xiwen Mu2, 3, Jiake Tian4, Yang Zhang3, Hao Zhang2
Affiliations
  • 1.Guixi Smelter, Jiangxi Copper Co., Ltd., Guixi 335424, China
  • 2.School of Metallurgy, Northeastern University, Shenyang 110819, China
  • 3.Shenzhen Zhiyi Technology Co., Ltd., Shenzhen 518110, China
  • 4.Beijing Ruitai Zhilian Technology Co., Ltd., Beijing 100020, China
Published: 2026-09-10 doi: 10.14186/j.cnki.1671-6620.2025.171
Outline
收藏切换

In order to investigate the effect of slag length on the wear of the flue wall during the copper flash smelting process, a numerical analysis has been carried out using a two-fluid model. The results indicate that the wear area on the upstream side of the flue wall increases initially and then decreases as the slag length increases. When the slag length reaches 0.4 m, the wear degree reaches its maximum, with a wear area of 2 m in height and 0.6 m in width. It is found that reducing the slag length can prevent the high-intensity wall erosion which is caused by the high-speed flue flow. Additionally, when the slag length reaches 0.5 m, the wall surface can be protected by altering the flow pattern of the multi-phase flue flow. Furthermore, reducing the airflow rate can effectively weaken the erosion on the flue wall. When the slag length is 0.4 m, a reduction of 2 000 m3/h on the airflow rate from 22 103 m3/h to 12 103 m3/h can result in a corresponding reduction in erosion intensity of 4.8%, 10.5%, 5.6%, 13.2%, and 17.7%, respectively. When the slag length is 0.5 m, the wear intensity in local areas is found to increase as the airflow rate decreases. However, the general trend of reduced erosion with decreasing the airflow rate is consistent with that when the slag length is 0.4 m, and the wear intensity is lower when the slag length is larger.

copper flash smelting  /  two-fluid model  /  slag  /  wall wear
张俊朋, 穆玺文, 田加科, 张扬, 张浩. 闪速炉炼铜挂渣长度对上升烟道壁面磨损影响的数值模拟仿真. 材料与冶金学报, 2026 , 25 (5) : 516 -524 . DOI: 10.14186/j.cnki.1671-6620.2025.171
Junpeng Zhang, Xiwen Mu, Jiake Tian, Yang Zhang, Hao Zhang. Numerical investigation on the effect of slag length on the wear of ascending flue walls during copper flash smelting process[J]. Journal of Materials and Metallurgy, 2026 , 25 (5) : 516 -524 . DOI: 10.14186/j.cnki.1671-6620.2025.171
Year 2026 volume 25 Issue 5
53
16
Cite this Article
BibTeX
Article Info
doi: 10.14186/j.cnki.1671-6620.2025.171
  • Receive Date:2025-07-29
  • Online Date:2026-11-13
  • Published:2026-09-10
Article Data
Affiliations
History
  • Received:2025-07-29
Funding
Affiliations
    1.Guixi Smelter, Jiangxi Copper Co., Ltd., Guixi 335424, China
    2.School of Metallurgy, Northeastern University, Shenyang 110819, China
    3.Shenzhen Zhiyi Technology Co., Ltd., Shenzhen 518110, China
    4.Beijing Ruitai Zhilian Technology Co., Ltd., Beijing 100020, China
References
Share
https://castjournals.cast.org.cn/joweb/clyyjxb/EN/10.14186/j.cnki.1671-6620.2025.171
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT