收藏切换
Techno-economic analysis of short-process hydrogen metallurgy under wind power-grid collaborative energy supply
收藏切换
Yitong Zhou1, 2, Mingxi Zhou1, Lun Gao1, Bo Peng1, Ruochen Liu1, Shuang Ye1
Journal of Materials and Metallurgy | 2026, 25(5) : 443 - 451
Less
收藏切换
Journal of Materials and Metallurgy | 2026, 25(5): 443-451
• Special Column: Technological Pathways for Synergistic Decarbonization of the Steel and Power Industries •
Techno-economic analysis of short-process hydrogen metallurgy under wind power-grid collaborative energy supply
Full
Yitong Zhou1, 2, Mingxi Zhou1, Lun Gao1, Bo Peng1, Ruochen Liu1, Shuang Ye1
Affiliations
  • 1.Institute of Carbon Neutrality, ShanghaiTech University, Shanghai 201210
  • 2.Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai 201210
Published: 2026-09-10 doi: 10.14186/j.cnki.1671-6620.2026.110
Outline
收藏切换

The hydrogen-based direct reduced iron-electric arc furnace (DRI-EAF) short-process metallurgical route is an important pathway for carbon emission reduction in the steel industry, with particular attention needed on the technical and economic feasibility of renewable energy utilization. This paper develops a hydrogen-based DRI-EAF process model co-powered by wind power and the power grid, and conducts a comparative evaluation of the energy consumption, carbon emissions, and economic performance of this process under direct green power connection from offshore and onshore wind conditions in Zhanjiang, Guangdong. The results show that, compared to onshore wind conditions, offshore wind conditions exhibit stronger wind power supply capacity, lower fluctuation, and less dependence on the grid. As the wind farm scale increases, the renewable energy penetration rate continues to rise, and carbon dioxide emissions continue to decline. At the same wind farm scale, the emission reduction performance under offshore wind conditions is consistently better than that under onshore wind conditions. In terms of economic performance, onshore wind conditions result in a lower steel production cost and a shorter payback period. At an installed capacity of 1 500 MW, the steel production cost per ton under onshore wind conditions is CNY 3 616.32, lower than CNY 4 132.89 under offshore wind conditions. When the onshore wind farm scale is 750 MW, the system has the shortest payback period of 7.66 years.

wind power  /  power grid  /  hydrogen production  /  direct reduced iron  /  steelmaking  /  technical and economic analysis
周奕彤, 周明熙, 高轮, 彭博, 刘若晨, 叶爽. 风电-电网协同供能下短流程氢冶金的技术经济分析. 材料与冶金学报, 2026 , 25 (5) : 443 -451 . DOI: 10.14186/j.cnki.1671-6620.2026.110
Yitong Zhou, Mingxi Zhou, Lun Gao, Bo Peng, Ruochen Liu, Shuang Ye. Techno-economic analysis of short-process hydrogen metallurgy under wind power-grid collaborative energy supply[J]. Journal of Materials and Metallurgy, 2026 , 25 (5) : 443 -451 . DOI: 10.14186/j.cnki.1671-6620.2026.110
Year 2026 volume 25 Issue 5
55
13
Cite this Article
BibTeX
Article Info
doi: 10.14186/j.cnki.1671-6620.2026.110
  • Receive Date:2026-04-30
  • Online Date:2026-11-13
  • Published:2026-09-10
Article Data
Affiliations
History
  • Received:2026-04-30
Affiliations
    1.Institute of Carbon Neutrality, ShanghaiTech University, Shanghai 201210
    2.Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai 201210
References
Share
https://castjournals.cast.org.cn/joweb/clyyjxb/EN/10.14186/j.cnki.1671-6620.2026.110
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT