收藏切换
Effect of titanium content in steel on sintering of ladle filler sands
收藏切换
Qiming Liu1, 2, Kang Yuan1, 2, Yongyuan Wang3, Zhiyin Deng1, 2, Miaoyong Zhu1, 2
Journal of Materials and Metallurgy | 2026, 25(5) : 501 - 509
Less
收藏切换
Journal of Materials and Metallurgy | 2026, 25(5): 501-509
• Research Paper •
Effect of titanium content in steel on sintering of ladle filler sands
Full
Qiming Liu1, 2, Kang Yuan1, 2, Yongyuan Wang3, Zhiyin Deng1, 2, Miaoyong Zhu1, 2
Affiliations
  • 1.Key Laboratory for Ecological Metallurgy of Multimetallic Mineral (Ministry of Education), Northeastern University, Shenyang 110819, China
  • 2.School of Metallurgy, Northeastern University, Shenyang 110819, China
  • 3.Henan Tongyu Metallurgy Materials Group Co., Ltd., Nanyang 474500, China
Published: 2026-09-10 doi: 10.14186/j.cnki.1671-6620.2024.217
Outline
收藏切换

To reveal the impact mechanism of Ti element in Ti-bearing steel grades on the sintering of ladle filler sands, laboratory experiments were conducted to investigate the effect of different Ti contents on the sintering behaviors of silica-based, chromite-based and zircon-based filler sands. The results show that with the increase of Ti content in steel, the liquid phase generated in the sintered sands increases significantly under the impact of liquid steel. The components (e.g., SiO2 and MnO) in the liquid phase react with dissolved Ti in steel, leading to the rise of Ti2O3 content in the liquid phase. Ti in steel can lower the melting point of the liquid phase inside the sintered filler sands, and promote the formation of the liquid phase. Meanwhile, under the impact of Ti, zircon-based filler sands decompose into many fine zirconia particles, and a large number of pores are formed after the shrinkage of the sintered grains. The sintering degree of silica-based filler sands is the severest. Considering both the performance and cost, chromite-based filler sands are more suitable for Ti-bearing steel grades.

filler sands  /  sintering  /  Ti-bearing steel  /  liquid phase
刘奇明, 袁康, 王勇源, 邓志银, 朱苗勇. 钢中钛含量对钢包引流砂烧结的影响. 材料与冶金学报, 2026 , 25 (5) : 501 -509 . DOI: 10.14186/j.cnki.1671-6620.2024.217
Qiming Liu, Kang Yuan, Yongyuan Wang, Zhiyin Deng, Miaoyong Zhu. Effect of titanium content in steel on sintering of ladle filler sands[J]. Journal of Materials and Metallurgy, 2026 , 25 (5) : 501 -509 . DOI: 10.14186/j.cnki.1671-6620.2024.217
Year 2026 volume 25 Issue 5
57
13
Cite this Article
BibTeX
Article Info
doi: 10.14186/j.cnki.1671-6620.2024.217
  • Receive Date:2024-08-08
  • Online Date:2026-11-13
  • Published:2026-09-10
Article Data
Affiliations
History
  • Received:2024-08-08
Funding
Affiliations
    1.Key Laboratory for Ecological Metallurgy of Multimetallic Mineral (Ministry of Education), Northeastern University, Shenyang 110819, China
    2.School of Metallurgy, Northeastern University, Shenyang 110819, China
    3.Henan Tongyu Metallurgy Materials Group Co., Ltd., Nanyang 474500, China
References
Share
https://castjournals.cast.org.cn/joweb/clyyjxb/EN/10.14186/j.cnki.1671-6620.2024.217
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT