In order to investigate the effect of slag length on the wear of the flue wall during the copper flash smelting process, a numerical analysis has been carried out using a two-fluid model. The results indicate that the wear area on the upstream side of the flue wall increases initially and then decreases as the slag length increases. When the slag length reaches 0.4 m, the wear degree reaches its maximum, with a wear area of 2 m in height and 0.6 m in width. It is found that reducing the slag length can prevent the high-intensity wall erosion which is caused by the high-speed flue flow. Additionally, when the slag length reaches 0.5 m, the wall surface can be protected by altering the flow pattern of the multi-phase flue flow. Furthermore, reducing the airflow rate can effectively weaken the erosion on the flue wall. When the slag length is 0.4 m, a reduction of 2 000 m3/h on the airflow rate from 22 103 m3/h to 12 103 m3/h can result in a corresponding reduction in erosion intensity of 4.8%, 10.5%, 5.6%, 13.2%, and 17.7%, respectively. When the slag length is 0.5 m, the wear intensity in local areas is found to increase as the airflow rate decreases. However, the general trend of reduced erosion with decreasing the airflow rate is consistent with that when the slag length is 0.4 m, and the wear intensity is lower when the slag length is larger.
| 科 Family | 属数 Number of genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) | 属 Genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) |
|---|---|---|---|---|---|---|
| 鹅膏菌科Amanitaceae | 2 | 11 | 5.26 | 鹅膏菌属 Amanita | 10 | 4.78 |
| 小菇科 Mycenaceae | 2 | 12 | 5.74 | 丝盖伞属 Inocybe | 5 | 2.39 |
| 多孔菌科 Polyporaceae | 8 | 14 | 6.70 | 蜡蘑属 Laccaria | 5 | 2.39 |
| 红菇科 Russulaceae | 3 | 23 | 11.00 | 小皮伞属 Marasmius | 6 | 2.87 |
| 小菇属 Mycena | 11 | 5.26 | ||||
| 光柄菇属 Pluteus | 5 | 2.39 | ||||
| 红菇属 Russula | 17 | 8.13 | ||||
| 栓菌属 Trametes | 5 | 2.39 |